What type of brake fluid does a Honda Accord take?

The Honda Accord requires DOT 3 brake fluid, as specified by Honda. This type of fluid is designed to meet the performance and safety standards necessary for your vehicle’s braking system.

Honda recommends using their Genuine Honda DOT 3 Brake Fluid (part number 08798-9008) to ensure optimal performance and compatibility with your Accord’s braking components. This OEM fluid is formulated to meet Honda’s specific requirements and is widely available through various retailers.

If Genuine Honda brake fluid is not readily available, you may use any high-quality DOT 3 brake fluid from reputable brands such as Prestone, Valvoline, or ShopPro. These alternatives are designed to meet or exceed DOT 3 specifications and are suitable for use in Honda vehicles.

While DOT 4 brake fluid is compatible with systems designed for DOT 3, it’s important to note that DOT 4 has a higher boiling point and different chemical composition. Mixing DOT 3 and DOT 4 fluids is generally acceptable, but it’s best to use the type specified by the manufacturer to maintain consistent performance.

Avoid using DOT 5 brake fluid, as it is silicone-based and not compatible with vehicles designed for glycol-based fluids like DOT 3 and DOT 4.

For optimal braking performance and safety, it’s recommended to replace your brake fluid every 2 to 3 years or as specified in your owner’s manual.

Does Honda need special brake fluid?

Aftermarket fluids are fine as long as they meet DOT 3 or 4. However, Honda’s PS fluid is special – only use the OEM stuff as it is thinner than other stuff – using thicker aftermarket PS will possibly damage the seals.

What happens if I put DOT 4 instead of DOT 3?

They’re used in most modern cars and trucks, because they work with ABS brakes. DOT 4 has a higher boiling point than DOT 3. You can use DOT 4 where DOT 3 is called for, but not the reverse. Using DOT 3 in a DOT 4 brake risks boiling the brake fluid.

Does it matter what brake fluid I use?

Although DOT 3 and DOT 4 fluids are all glycol-based, the chemical composition of each type of fluid is different, so it will have a different effect on the system. To make sure the system works as it should, the best thing to do is to keep using the brake fluid recommended by the manufacturer.

Is DOT 3 and DOT 4 compatible?

DOT 3 brake fluid is compatible with DOT 4 brake fluid. However, DOT 4 offers a higher boiling point. DOT 5.1 is used in high-performance and heavy-duty applications due to its high boiling point. It’s compatible with DOT 3 and DOT 4 fluid.

Is DOT 4 brake fluid the same?

Brake fluid DOT 4 uses glycol ether and borate ester compounds which improve its performance compared to DOT 3. Cars produced after 2006 use it as a standard. Like its predecessor, it is suitable for all brake systems and driving conditions.

What is the difference between DOT 3 and DOT 4?

The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.

Is it OK to use DOT 3 and DOT 4 together?

DOT 4 has a higher boiling point than DOT 3. You can use DOT 4 where DOT 3 is called for, but not the reverse. Using DOT 3 in a DOT 4 brake risks boiling the brake fluid. Glycol-based fluid can absorb water over time, which leads to corrosion.

Does Honda use DOT 3 or 4 brake fluid?

Dot 3 or 4 will work in Honda. If you are one that does a brake fluid flush and fill on a regular basis, with very few exceptions, it really doesn’t matter which DOT 3, DOT 3/4 or DOT 4 you use for a daily driver.

What type of brake fluid goes in a Honda Accord?

DOT 3 Brake Fluid
Honda Genuine Fluid 08798-9008 DOT 3 Brake Fluid – 12 oz.

Should I use DOT 3 or 4?

DOT 4 brake fluid has higher wet/dry boiling points than DOT 3, making it a better choice for higher temperature braking applications, like in high-performance vehicles.