AHG Auto Service » Make » Ford » How do Ford owners change oil?

How do Ford owners change oil?

How to Change Oil in a Ford Vehicle
Changing the oil in a Ford vehicle is an important part of regular maintenance to keep the engine running smoothly. Here are the steps to change the oil in a Ford vehicle:
1. Gather the necessary materials: You will need a metal or plastic oil-fill funnel, an oil rag, and the correct grade of oil for your vehicle. You can find the oil grade in your owner’s manual.
2. Locate the oil dipstick: Open the hood and find the oil dipstick, which is usually near the engine and has a brightly colored handle. If you’re unsure, refer to your owner’s manual for the exact location.
3. Check the oil level: Before changing the oil, check the oil level by pulling out the dipstick, wiping it clean with a rag, fully inserting it, and then removing it. The oil level is the highest point on the dipstick that is coated with oil. If the oil level is between the MIN and MAX marks, you don’t need to add oil.
4. Drain the old oil: Locate the oil drain plug underneath the vehicle. Place a drain pan underneath the plug, then use a wrench to loosen and remove the plug. Allow the old oil to drain completely into the pan.
5. Replace the oil filter: While the oil is draining, locate the oil filter. Use an oil filter wrench to remove the old filter. Before installing the new filter, apply a thin layer of oil to the rubber gasket on the top of the filter. Then, screw the new filter onto the engine by hand until it is snug. Do not overtighten.
6. Add new oil: Once the old oil has finished draining, replace the drain plug and tighten it securely. Use a funnel to pour the new oil into the engine through the oil-fill opening. Refer to your owner’s manual for the recommended oil capacity for your specific Ford vehicle.
7. Check the oil level: After adding the new oil, wait a few minutes for it to settle, then check the oil level again using the dipstick. Add more oil if necessary to bring the level between the MIN and MAX marks.
8. Dispose of the old oil: Properly dispose of the old oil by taking it to a recycling center or an auto parts store that accepts used oil.
Remember, it’s always a good idea to consult your owner’s manual for specific instructions and recommendations for your Ford vehicle. Regular oil changes help keep your engine running smoothly and can improve fuel efficiency.
I hope this helps! Let me know if you have any other questions.

How do you change the oil on a Ford?

Minutes. Hey it’s Alex from carparts.com. If you enjoyed this video and want to support us. Like comment and subscribe okay back to work when you change the oil you should also replace the oil filter.

Does Ford use full synthetic?

Yup you can ask your dealer to use Motorcraft Full-Synthetic. They should have it in-stock for the performance vehicles that require full synth. Mustang GT500, F-150 Raptor R, Ford GT, etc. Pretty much anything supercharged.

What brand of oil do Ford dealerships use?

For your prices and availability select a dealer
Engine Oil. MotorCRAFT SAE 5W 40 API CJ 4.

How Ford owners check their oil?

How to Check Car Oil in Your Ford

  • Park your car on level ground. Turn your car off and let the engine cool down.
  • Pop the hood and locate the dipstick.
  • Remove the dipstick, wiping off any remnant oil.
  • Insert the dipstick in its tube. Pull it back out, and observe the oil level based on the dipstick’s markings.

How does Fordpass calculate oil life?

The available Intelligent Oil-Life Monitor calculates oil change service intervals based on vehicle use, operating conditions, and time since the last oil service. The Intelligent Oil-Life Monitor must be reset after each oil change.

How often does a Ford need an oil change?

10,000 miles
Breathe Easy, Ford Tells You When You Need an Oil Change
Never exceed one year or 10,000 miles between oil change intervals.

What does Ford use for oil change?

Ford recommends using Motorcraft®* motor oil for your Ford vehicle. Using the right oil helps keep your vehicle’s engine clean, reduces overall wear, and maximizes performance. Recommended engine oil specifications can be found in your Owner’s Manual under Capacities and Specifications.

How do new cars know when to change oil?

From the car’s computer, it collects information on things like the number of starts (individual trips), the engine temperature variations (driving conditions) and the number of miles you drive. Through the years, engineers have created algorithms that are pretty accurate in predicting when the oil is spent.

How does Ford oil change indicator work?

The Intelligent Oil Life Monitor calculates a percentage of oil life remaining (from 100% to 0%) and takes into account items such as engine temperatures, idling, towing and other driving habits.

How do I change my engine oil myself?

How to Change Your Oil

  1. Step 1: Jack It Up, Open It Up. First, you’ll want to lift the car high enough to give yourself room to work under it.
  2. Step 2: Unplug It, Drain It.
  3. Step 3: Off With the Old Filter.
  4. Step 4: Drain Plug in, Filter On.
  5. Step 5: Fill It Back Up with Oil.
  6. Step 6: Check the Oil Level, Check for Leaks.
AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment