How do you change the oil on a 3.2 Ford Ranger?

Changing the Oil on a 3.2 Ford Ranger
To change the oil on a 3.2 Ford Ranger, you can follow the steps below:
Oil Pump Priming:
The oil pump priming procedure for the Ford Ranger 3.2 is crucial to ensure you do not damage the engine. It is important to note that this procedure is carried out at your own risk, and if you are not confident enough to attempt it, it’s recommended to leave it to the professionals and pay for the service. The oil pump priming method is a critical step in the oil change process for the 3.2 Ford Ranger.
Oil Filter and Engine Oil:
1. Use a commercially available 74/76mm 15 flutes end cap oil filter wrench to remove the oil filter.
2. Lubricate the new engine oil filter sealing surface with clean engine oil and install the new filter.
3. Install the rear skid plate and the bolts, torquing them to 22 lb.ft (30 Nm).
4. Fill the engine with clean engine oil, specifically SAE 5W-30 synthetic blend motor oil, using approximately 6.2 quarts.
Oil Change Process:
– Remove the skid plate, clean out the oil filter trough, and install the new oil filter.
– Use 6 quarts of Mobil 1 5W-30 Annual Protection for the oil change.
– Ensure the oil level on the dipstick is at the appropriate level after adding 6 quarts of oil.
Additional Information:
It’s important to note that the Ford Ranger uses a variable-displacement oil pump, which aims to improve efficiency by not pumping more oil than is necessary at the time. This feature is crucial to understand when changing the oil on the 3.2 Ford Ranger.
The recommended oil type for the 3.2-liter turbo-diesel engine is a 5W30 fully synthetic oil. It’s essential to use the correct oil type for the specific engine fitted to your Ford Ranger.
In summary, changing the oil on a 3.2 Ford Ranger involves specific steps such as oil pump priming, using the appropriate oil filter wrench, lubricating the new engine oil filter, and filling the engine with the recommended oil type and quantity.
Remember, it’s always important to follow the manufacturer’s guidelines and recommendations when performing maintenance on your vehicle.
I hope this information helps you successfully change the oil on your 3.2 Ford Ranger!

Can I use 5W 40 on Ford Ranger?

As tested in the industry Sequence IVA wear test. Castrol Magnatec 5W-40 A3/B4 is suitable for use in automotive petrol and diesel engines where the manufacturer recommends an ACEA A3/B4, A3/B3, API SN/CF or earlier specification 5W-40 lubricant.

What kind of oil does a Ford Ranger 3.2 diff take?

Ford Ranger Front Differential Oil 75W-90 (1 Litre) ->2022.

What happens if I put too much oil in my Ford Ranger?

What if you overfill your vehicle with engine oil? It can actually cause significant damage to the engine components and even cause your engine to seize up.

How many quarts of oil does a v6 Ford Ranger take?

Capacity: 5.9 (6.2 qt) (When filter is removed.)

How much oil does a 3.2 Ford Ranger take?

9.75 L
Capacities and Specifications – 3.2L Diesel

Item	Capacity
Engine oil with filter	9.75 L
Engine oil without filter	9.35 L
Clutch fluid	Between the MIN line and the MAX line
Manual transmission oil	2.7 L

Should I use 75W90 or 75W140?

I think you’ve got your numbers backwards the 75W140 is the heavier (140 vs 90) and for more severe service. It is recommended only for the rear diff and only for heavy towing and continuous use. You shouldn’t go heavier than 75W90 in the front and for normal duty and occasional towing 75W90 is fine for the rear.

What is high mileage oil for Ford Ranger?

Mobil 1 – Extended Performance High Mileage Full Synthetic Motor Oil 5W-20, 5 Quart (Part No. 15020) Product Features: Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-20 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes.

What kind of oil does a V6 Ford Ranger take?

All TEMPS…. 5W-20 – This specification has been updated from 5W-30 to 5W-20 per a Technical Service Bulletin from the manufacturer 5W-20 is the preferred viscosity. Capacity: With filter 4.5 quarts.

What will happen if I use 15W 40 instead of 5W-30?

Can you put 15W-40 in a 5W30 engine? Generally, no you do not want to do that. 15W-40 is a diesel engine oil grade and 5W-30 is a gasoline one. A diesel oil add pack will poison the catalyst and damage the emission system.

Can I use engine oil in a diff?

But if you are thinking of putting a 5W-20 engine oil in a SUV or small truck differential, you will destroy it, as it is too thin, and the sink/phosphorous additives are not as strong in extreme pressure as the sulfur/phosphorous used for most differentials or industrial gear boxes.