How to Change Wiper Blades on a Honda Insight
To change the wiper blades on a Honda Insight, you can follow these general steps:
1. Buy the correct wiper blades: Different Honda Insight models may have different types of wiper blade attachments, so it’s important to buy the right ones for your specific model. You can check your vehicle’s owner’s manual for specific instructions or consult with a trusted auto parts store to ensure you get the correct wiper blades.
2. Prepare your vehicle: Before you start changing the wiper blades, turn on your wipers and then turn off your Honda Insight when the wipers are at their mid-way point on your windshield. This will make it easier to lift the wipers up and away from the windshield. Your old wipers should stick out, away from the windshield, allowing for easy access during the rest of the changing process.
3. Remove the old wiper blades: Look for a button or latch on the wiper blade attachment. Lift or slide this button or latch to release the old wiper blade. Once released, you can remove the old wiper blade from the wiper arm. Take note of which side the old blade was on, as you’ll need to install the new blade on the same side.
4. Install the new wiper blades: Compare the length of the old blade to the new wiper blades. Ensure that you have the correct size for each side of the windshield. Place the new blade on the correct side, making sure it aligns with the wiper arm attachment. Push the new blade onto the wiper arm until you hear a click, indicating that it is securely in place.
5. Test the new wiper blades: Once you have installed the new wiper blades, turn on your wipers to test their functionality. Make sure they are wiping the windshield properly and not leaving streaks or skipping sections. If there are any issues, double-check that the blades are securely attached and aligned correctly.
It’s important to note that these are general instructions, and it’s always a good idea to consult your vehicle’s owner’s manual for specific instructions on changing the wiper blades for your Honda Insight model.
Contents
- Can I replace my wipers by myself?
- How do you remove and refit wiper blades?
- How do you lift windshield wipers on a Honda?
- How do you install J Hook wiper blades?
- What size rear wiper blades for Honda Insight?
- How do I change my wiper blades?
- How long is a Honda Insight wiper?
- What size wiper blades for Honda Insight?
- How do you change a Honda wiper blade insert?
- Can you replace wiper blades yourself?
Can I replace my wipers by myself?
And then slide the blade down to release it from the hook. Here. It is from another angle. Once you’ve removed the blade. You can reinstall new wiper blades by reversing this process.
How do you remove and refit wiper blades?
Keep hold of the arm as you slot it into the locking tab push. Down the locking tab it’ll click one in place and wipers with a locking button should lock into place automatically.
How do you lift windshield wipers on a Honda?
Start with the vehicle on or in accessory mode then turn the vehicle. Off within 10 seconds lift the wiper stock and hold for at least 2 seconds the wiper will move to the vertical.
How do you install J Hook wiper blades?
Down push your little plastic. Piece in slide it over the arm. And slides right back up clicks into place. And lower it back down it’s that easy.
What size rear wiper blades for Honda Insight?
Honda Insight 2010 – 2013 (ZE2)
| Front Driver: | 26″ / 650mm |
|---|---|
| Front Passenger: | 17″ / 425mm |
| Rear: | 16″ / 400mm |
How do I change my wiper blades?
Once it’s disengaged from the hook the blade can be removed. Position your new blade.
How long is a Honda Insight wiper?
The Honda Insight 2009 Onwards model requires a 26” wiper blade on the drivers side and a 16″ blade on the passengers side and all of the following wiper blades are designed to fit this vehicle. The type of wiper arm fitting for this model is the Standard Hook arm attachment.
What size wiper blades for Honda Insight?
Honda Insight Windshield Wiper Fitting Guide:
The Honda Insight uses a standard hook wiper arm fitting for both front and rear windscreens. Earlier models use 20” driver’s, 18” passenger’s and 16” for the rear screen. Later models use 26” driver’s side & 16” passenger’s side.
How do you change a Honda wiper blade insert?
It you just slide it. Back through like that and just slide it back down and until it grabs. And it is completely installed.
Can you replace wiper blades yourself?
Changing your wiper blades is typically a simple task. If you’re not confident about your skills, it may be a good idea to leave it to the professionals — it’s often done when you take your car in for an oil change.
