AHG Auto Service » Make » Ford » How do you open the bonnet on a Ford Freestyle?

How do you open the bonnet on a Ford Freestyle?

To open the bonnet on a Ford Freestyle, you can follow these steps:
1. Make sure the handbrake is on and the ignition is turned off.
2. Allow the engine to cool for about 10 minutes.
3. Reach under the dash and pull the lever to release the bonnet latch .
4. The bonnet will pop open.
5. Lift the bonnet slightly and feel for the release catch, then slide it to the left.
6. Lift the bonnet fully and prop it up safely.
7. To close the bonnet, hold it up with one hand and release the strut with the other.
8. Let the bonnet down gently, and about 30 cm from the body, drop it to lock it.
Please note that it is not recommended to open the bonnet in high winds.
I hope this helps! Let me know if you have any other questions.

Where is bonnet release on Ford Escape?

How do you open the hood of Ford Escape? Open the driver’s door and look on the side of the dashboard near the door hinges. There should be a bonnet release lever. Pull that and then walk to the front of the car.

Why won’t my bonnet open?

There are 3 main reasons why you can’t open your car bonnet/hood. First, sometimes the bonnet gets jammed, second, the lever can sometimes become faulty, and thirdly it could be a broken cable causing this problem to occur. Sometimes your car bonnet can get jammed and then fail to open when you pull the open lever.

Where is the button to open the bonnet?

Which can normally be found in the drivers footwell area or on the opposite side in the passenger’s foot. Well pull the lever towards you until you hear the bonnet release.

Where is the hood release lever?

There is a 2 X indicator to remind you of this new functionality. This simplified process means that there is no lever underneath the hood to find and unlatch allowing you to save time.

Where is the hood release switch located?

Step 1 – Locate the hood release, which is usually located near the driver side kick panel. If it isn’t there, we suggest checking just under the dash on the left side, as well. Step 2 – Hold the release and firmly pull outward to activate the hood latch.

How do you release a car bonnet?

A. Message will appear on the instrument display to let you know the bonnet has been released. Then simply lift the bonnet up from front of the car.

How do you open the bonnet on a 2017 Ford Ka?

Pull the bonnet release lever 1 situated underneath the steering column shroud. Raise the bonnet slightly at the front and push the safety catch 2 sidewards. Raise the bonnet and support it with the strut in the retainer 3 ensuring it is secure.

Where is the bonnet release on a Ford Ka?

Reach under the dash and pull the lever. The bonnet will pop open. Lift the bonnet slightly and feel the release catch, then slide it to the left.

Why can’t i open my bonnet?

How to open a stuck bonnet

  • Get some help. Ask an assistant to push down at the front of the bonnet (gently but firmly) while you pull on the release lever again.
  • Pull the cable manually. Take a closer look at the release lever.
  • Work through the grille.
  • Jack up the car.

Where is the bonnet release on a Ford?

Open the left side passenger door and locate the black lever. Pull the lever until you hear a click. The bonnet will now be open enough for you to find the yellow latch inside to the left of the Ford badge. Pull the yellow latch with one finger and lift the bonnet, securing it using the stand near the grill.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment