How to Reset the Tire Pressure Sensor on a Chevy Sonic
To reset the tire pressure sensor on a Chevy Sonic, you can follow these steps:
1. Make sure you are parked with the engine off and that the tire pressure is correct, typically between 35 to 38 psi.
2. Turn the ignition key to the “on” position.
3. Depress the TPMS button, usually located under the dash, until the TPMS light blinks several times.
4. Drive the Sonic for a while at or above 20 mph.
5. Park the car and press the start/stop button for more than five seconds without depressing the brake pedal.
6. Find the turn signal and press the menu button until the “VEHICLE” menu is displayed.
7. Use the thumbwheel to find the “Tire Pressure” menu, then press the SET/CLR button twice.
8. Take a TPMS relearn tool and use it to activate the TPMS sensor on each tire.
9. After activating each sensor, turn off the ignition to complete the reset process.
Please note that these instructions are based on the Chevy Sonic owner’s manual and should apply to the second generation of the Chevy Sonic (2012-2021 model years).
Remember to always consult your vehicle’s manual for specific instructions and refer to the information provided by the manufacturer.
I hope this helps! Let me know if you have any other questions.
Contents
- Does every car have a TPMS reset button?
- How do you calibrate a tire pressure sensor on a Chevy?
- Can I reset my tire sensors myself?
- How do you manually reset a tire pressure sensor?
- Where is the tire pressure sensor reset button located?
- Where is the TPMS reset button on a Chevy Sonic?
- How do you reset the tire pressure sensor on a 2015 Chevy Sonic?
- Where is the TPMS button located?
- Why is my TPMS light on but tires are fine?
- Where is the tire pressure reset button?
It is worth pointing out that not all vehicles have a TPMS reset button, and the system may automatically reset itself once the tyre pressure is adjusted correctly. If you’re uncertain if your vehicle has a reset button, refer to the owner’s manual or get help from a local dealership.
How do you calibrate a tire pressure sensor on a Chevy?
Hold the TPMS reset button until the tire pressure light blinks three times and then release it. Start the car and wait 20 minutes for the sensor to refresh. The tire pressure monitor reset button is usually located beneath the steering wheel.
Can I reset my tire sensors myself?
Once you have properly inflated your tires, the tire pressure light should automatically go off. However, if it doesn’t, there are a few different things that you can try: Drive at or above 50 mph to reset the sensor for 10 minutes. This causes your sensor to reset the next time you turn on your car.
How do you manually reset a tire pressure sensor?
Step the calibration. Process will finish automatically within a few miles of driving. See your vehicle’s owner’s manual for more details or go to owners.honda.com for a downloadable version.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
Usually the button is under the steering wheel. If the TPMS light is on, inflate each tire 3 PSI over the documented amount then deflate them completely. Then, inflate them to the proper tire pressure.
How do you reset the tire pressure sensor on a 2015 Chevy Sonic?
To reset the tpms on the 2015 Chevy sonic make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes.
The TPMS reset button is usually located beneath the steering wheel. If you can’t locate it, check your owner’s manual. Inflate all of your tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to do the same thing to the spare tire, as it could also have a sensor.
Why is my TPMS light on but tires are fine?
For instance, extreme cold or hot temperatures can also be the reason why your TPMS light turns on. This is due to the contraction that an extreme temperature causes when you are trying to drive in the cold or heat. Other times, the tire pressure light can turn on and off due to any the malfunctions in the sensors.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
