AHG Auto Service » Make » Toyota » How do you reset the TPMS on a Toyota Matrix?

How do you reset the TPMS on a Toyota Matrix?

How to Reset TPMS on a Toyota Matrix
To reset the TPMS (Tire Pressure Monitoring System) on a Toyota Matrix, you can follow these steps based on the information from the search results:
1. Reset Procedure:
– If your vehicle has an ignition button, press the POWER button twice without touching the brake pedal. Look for the TPMS reset button and press the button.
– Another method involves pressing and holding the tire pressure light reset switch until the light blinks slowly three times. Then, turn the engine off and back on to see if the tire pressure warning light has turned off.
– For certain models of Toyota, including the Toyota Matrix, you can locate the pressure warning switch, which should be located under the steering wheel or in the glove box. Press the pressure warning reset switch down until the TPMS light begins to blink. It should blink 3 times.
2. Additional Information:
– It’s important to note that the procedure may vary slightly depending on the model year of the Toyota Matrix. The instructions provided are specifically for the second generation of the Toyota Matrix (2007-2014 model years).
3. Professional Assistance:
– If you encounter difficulties or are unsure about the reset process, it’s recommended to visit a Toyota service center for assistance. They have the equipment needed to diagnose and fix TPMS issues.
It’s important to follow the specific instructions for your vehicle to ensure the TPMS is reset correctly.

How do you manually reset TPMS?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh.

Can I reset my TPMS myself?

Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.

Where is the TPMS reset button on Toyota Matrix?

Pressure. So now we need to reset the tire pressure management system okay so now when i turn the key. On. You can see the tire pressure light comes on. And it doesn’t go out.

How do I reset my Toyota TPMS sensor?

With the vehicle off, turn the key to the “ON” position, but do not start it. Hold the TPMS reset button until you see the flashing tire pressure light blink three times. Then release the reset button. Start the car and give it about 20 minutes for the sensor to refresh.

Where is the Toyota TPMS button?

You’ll find it low and to the right of the steering wheel on the instrument panel. Hold the button down until the TPMS indicator light in the instrument panel blinks slowly 3 three times. Wait for several minutes with the engine running, to allow the system to record each tire’s pressure, then turn the engine off.

How do I clear my TPMS check?

On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.

How do you reset the tire pressure light on a 2005 Toyota Matrix?

Now when you start the vehicle. And if the reset was done correctly.

Why won t my tire pressure light go off even though pressure is fine?

If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.

How do I manually reset my TPMS light?

Drive at or above 50 mph to reset the sensor for 10 minutes. This causes your sensor to reset the next time you turn on your car. With the vehicle off, turn the key to the “On” position, but do not start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it.

Where is the TPMS reset button located?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment