AHG Auto Service » Make » Acura » How do you use cruise control on an Acura?

How do you use cruise control on an Acura?

Using Cruise Control on an Acura
To use cruise control on an Acura, follow these steps:
1. Activation:
– While driving between 20 and 95 MPH, press the MAIN button on the right side of your steering wheel. Confirm that the green ACC icon has appeared on the instrument display, and accelerate to your desired speed. Once you have maintained speed, press down on the Set switch.
2. Adjusting Speed:
– If a change in speed is required, press the Set switch up or down to adjust in 1-MPH increments.
3. Canceling Cruise Control:
– To cancel out of cruise control, you can press the CANCEL button, MAIN button, or lightly depress the brake pedal.
4. Adaptive Cruise Control (ACC):
– Acura also offers Adaptive Cruise Control (ACC), which uses radar sensors to watch traffic ahead. When traffic speeds up again, the car will automatically accelerate up to your set speed. If the car ahead reaches a full stop, your Acura will as well. Once traffic starts moving again, simply press the ACC/+ toggle on the steering wheel or press the accelerator pedal to resume your set speed.
Remember, while cruise control is a convenient feature, it’s important not to rely on it for emergency braking. Always be engaged and in control should evasive steering or braking become necessary.

How do you turn on cruise control on an Acura TL?

Accelerate to the desired speed (above 25 mph/40 km/h). Press DECEL/SET and take your foot off the pedal to set the speed. The CRUISE CONTROL indicator appears. Press RES/ACCEL to increase or DECEL/SET to decrease speed.

Where is the switch for cruise control?

Locate your car’s cruise control switches.
Usually, these are found either on the steering column (the part connecting the steering wheel to the dashboard area), or on the steering wheel itself. Controls found on the steering wheel usually consist of a few buttons.

What is cruise mode in Acura MDX?

Press and hold the Distance button. Cruise Mode appears in the multi- information display. Press and hold the button again to switch back to ACC. Adaptive Cruise Control (ACC)* Helps maintain a constant vehicle speed and a set following interval behind a vehicle detected ahead of yours.

How do you set cruise control on a Acura MDX?

Press DECEL/SET and take your foot off the pedal to set the speed. The CRUISE CONTROL indicator appears. Press RES/ACCEL to increase or DECEL/SET to decrease speed. Each time you press the button, the vehicle speed is increased or decreased by about 1 mph (1.6 km/h).

How does Acura cabin control work?

Speakers. You can access cabin talk by selecting the cabin talk icon from the infotainment unit’s home screen then simply begin speaking and you will be heard through the rear. Speakers.

Does Acura have cruise control?

Acura Models with Adaptive Cruise Control feature
The adaptive cruise control with low-speed follow on Acura TLX, MDX, and RDX models function below 25 km/hr and can automatically stop your car when it detects that traffic has stopped ahead.

How do you set cruise control on an Acura?

How to Use Acura Adaptive Cruise Control

  1. While driving between 20 and 95 MPH, press the MAIN button on the right side of your steering wheel.
  2. Confirm that the green ACC icon has appeared on the instrument display, and accelerate to your desired speed.
  3. Once you have maintained speed, press down on the Set switch.

How do I set cruise mode?

Once we have turned left we accelerate the car up to speed and then press the set button to start cruising. The cruise control icon turns green and confirms the speed we have set. We can now lift our

Where is my cruise control button?

steering wheel
Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board.

How do I activate cruise control?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment