Based on the search results, the Ford Contour radiator fan has a flow rating of around 3500 CFM. This makes it a suitable option for providing cooling to the radiator. The overall thickness of the fan is only 3.5 inches, which allows it to fit between the radiator and the crank pulley. It is worth noting that there are other fan options available with higher CFM ratings, but the Ford Contour fan provides a good balance between flow rating and size.
Please let me know if there’s anything else I can help you with!
Contents
- How many amps does a car cooling fan draw?
- What is the CFM of a normal fan?
- How do you calculate CFM for a cooling fan?
- Is 350 CFM good for a fan?
- How many CFM do I need to cool a big block?
- How many CFM is a radiator fan?
- Does higher CFM mean better cooling?
- How much power does a cooling fan draw?
- How much CFM do I need to cool a v8?
- How many amps do Ford Contour fans draw?
How many amps does a car cooling fan draw?
The fans should draw less than 40 amps so you will not be able to do this with a meter you install inline as they only do 10 amps typically. The relay (fan control) should be mounted on a clean surface with heatsink grease to allow the heat to dissapate into the frame.
What is the CFM of a normal fan?
200 to 300 square feet: 3,000 to 4,000 CFM (typically a standard bedroom or kitchen) 300 to 450 square feet: 4,000 to 6,000 CFM (usually a master bedroom or living room) Over 450 square feet: 5,000 to 9,000 CFM.
How do you calculate CFM for a cooling fan?
As mentioned above, cubic feet per minute is a measurement used to describe airflow. The number represents the volume of air moved through a given space every minute. To calculate CFM, multiply cubic feet by 60 seconds. So, for example, a fan moving 1 cubic foot of air per second would be equal to 120 CFM.
Is 350 CFM good for a fan?
Often, a ventilation power varying between 350 CFM and 500 CFM is sufficient, depending on your cooking habits.
How many CFM do I need to cool a big block?
Most street car applications need about 2,000 cfm for a 400-500 hp engine with air conditioning and trucks pulling trailers need 3,000 to 4,000 cfm depending on the engine and road conditions.
How many CFM is a radiator fan?
There are a few rules of thumb for a 4-cylinder engine, ideally you should be looking at a fan that’s going to deliver between 1300 and 1600 CFM. If you have a 6-cylinder engine then you’ll need to be up in the 2,000 CFM range and for v8 engines, if you have a smaller cubic inch v8 2800 to 3000 CFM.
Does higher CFM mean better cooling?
The larger the space, the higher the fan CFM must be in order to efficiently cool a room. CFM for fans is a critical measurement for determining the right fan for your space. If the CFM is too low, the room will be unable to be cooled and undermine any energy efficiency of the fan.
How much power does a cooling fan draw?
Your unit’s electricity usage depends on its type, size, and other factors. It usually takes 0.033 kWh to run a fan per hour. Running it the whole night will use 0.264kWh. Fans consume 5.54 kWh per week and 22.17 kWh a month.
How much CFM do I need to cool a v8?
2,500 CFM
2,000 CFM for a 6-cylinder. 2,500 CFM for a 8-cylinder.
How many amps do Ford Contour fans draw?
Keep in mine the max amps of these fans are about 20 each, 40 amps total.
