AHG Auto Service » Make » Dodge » How much does it cost to replace ball joints on a Dodge Charger?

How much does it cost to replace ball joints on a Dodge Charger?

Cost of Replacing Ball Joints on a Dodge Charger
The cost of replacing ball joints on a Dodge Charger can vary based on several factors, including the model year and the specific type of ball joint replacement required. On average, the cost for parts and labor is estimated to be around $300, with parts typically ranging between $100 and $175, and labor costs ranging from $125 to $200. It’s important to note that taking the vehicle to an independent shop may be more cost-effective than going to a dealership, or the replacement can also be done as a DIY project to save on labor costs.
The process of replacing a ball joint involves disconnecting the front wheel, separating the suspension to allow the ball joint to come free, and then disconnecting the ball joint from the control arm and the steering knuckle. This can be a relatively straightforward job for a qualified mechanic, and it is considered an intermediate DIY repair on most vehicles.
It’s worth mentioning that the cost of a ball joint replacement can be influenced by the car model. For example, the cost of a ball joint replacement on a Dodge Ram 1500 can go up to $260, with additional labor costs potentially totaling around $500 for each ball joint.
Overall, the cost of replacing ball joints on a Dodge Charger is influenced by various factors, and it’s advisable to obtain a specific cost estimate from a reputable mechanic or service center based on the individual vehicle’s needs.

Do you need an alignment after replacing ball joints?

There’s no denying that it’s very important to replace your ball joints when needed. However, it’s worth noting that doing that doesn’t necessarily mean you need an alignment. The only time you need one after replacing the ball joints is if the previous alignment was performed when ball joints were not in good shape.

Is it OK to drive with a bad ball joint?

What are the risks of driving with a bad ball joint? A worn ball joint is not a problem that should be ignored. If the wear becomes severe, the stud may separate from the housing resulting in immediate loss of control of your vehicle.

What does a ball joint sound like when it is bad?

Noise – this can be a clunking or squeaking noise. Clunking noises are caused by the worn ball joints rattling as the suspension travels up and down over the road. The squeaking noise is caused by the rubber boot that protects the grease inside the ball joint is damaged, the ball joint will start to squeak.

Can you tell if ball joints are bad?

And upon visual inspection you could see the boots to the ball joints are cracked allowing dirt and water and everything to get in there and these are non greasable. So these need to be serviced.

How do you tell if your ball joints are going out?

Wiggle. It back and forth pushing in and out feeling for any play. When I say play you’re gonna feel some type of movement your tires should be solid.

Do you need an alignment after replacing lower ball joints?

There’s no denying that it’s very important to replace your ball joints when needed. However, it’s worth noting that doing that doesn’t necessarily mean you need an alignment. The only time you need one after replacing the ball joints is if the previous alignment was performed when ball joints were not in good shape.

How much does it cost to replace all 4 ball joints?

Ball joint prices range from $20 to $150, while labor charges average between $80 and $200 per hour. The replacement process takes one to three hours. Some shops offer package deals for multiple ball joint replacements, saving labor costs. Usually recommended after replacement, wheel alignment costs $50 to $150.

Is replacing ball joints a big job?

Ball joint replacement is not straightforward, as they can be very tricky to access and install – especially with age and rust.

Can you replace just the ball joint without replacing control arm?

In the case of a ball joint mounted on a cast track control arm you can often settle for only replacing the ball joint if the bushings of the track control arms do not show signs of wear and tear.

Is it worth replacing ball joints?

A broken ball joint may be the cause of a mysterious clunking noise or drifting steering. And once they’re worn, they will seriously affect your steering and suspension. If a ball joint fails completely, it can even result in the wheel dramatically falling off the car.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment