AHG Auto Service » Make » Ford » How much is a tie rod for a Ford f150?

How much is a tie rod for a Ford f150?

Cost of a Tie Rod for a Ford F-150
Based on the search results, the cost of a tie rod for a Ford F-150 can vary depending on the specific type and brand. Here are some key points to consider:
– Price Range: The price range for tie rod ends for a Ford F-150 varies, with some products starting from as little as $21.29 and tie rod end sleeve products starting from as little as $9.79 .
– Importance of Replacement: It’s important to replace a worn-out tie rod end as it can significantly affect steering control and safety. A faulty tie rod can make steering a nightmare, causing the wheel to shake and vibrate due to a loose connection between the steering box and wheel spindle.
– Installation and Alignment: When replacing a tie rod, a wheel alignment will be necessary once the new one is in place. The process involves removing the castle nut and taking off the tie rod before installing the new one.
It’s important to note that the specific cost of a tie rod for a Ford F-150 may vary based on factors such as the year of the vehicle, the specific component needed, and the retailer or service provider.
If you need further details on the cost or specific recommendations for tie rod replacement for your Ford F-150, it’s advisable to consult with a trusted automotive parts supplier or a certified mechanic for accurate pricing and guidance.

Should I replace all 4 tie rods?

Ideally, YES – if the concern is excessive wear. However, sometimes a ball joint which might be otherwise in good condition (that is, not worn) can be damaged as a result of an accident or impact. If the damage does not affect both tie rod ends, you can usually replace just one. Though a thorough inspection is advised.

Is it OK to replace just one tie rod?

Ideally, YES – if the concern is excessive wear. However, sometimes a ball joint which might be otherwise in good condition (that is, not worn) can be damaged as a result of an accident or impact. If the damage does not affect both tie rod ends, you can usually replace just one. Though a thorough inspection is advised.

Do you need an alignment after replacing tie rods?

If you have rack and pinion-type inner and outer tie rods, you can often remove and replace them without upsetting the vehicle’s alignment specs. However, you will need to have an alignment done after replacing the outer tie rods.

What are the symptoms of a bad tie rod?

Common signs include a steering wheel that shakes or vibrates and looseness or excessive play in the steering wheel. The vibration typically becomes worse as you accelerate or turn. Don’t wait for your steering issues to become worse; get your vehicle to a qualified technician as soon as you notice these issues.

Are tie rods easy to fix?

Replacing tie rod ends refers to repairing an integral part of a vehicle’s steering mechanism. With a few basic tools and a little bit of know-how, this is a procedure that anyone, with a little bit of automotive experience, can perform on their own.

How expensive is a tie rod replacement?

The cost of replacing a tie rod depends on the type of vehicle, the parts’ scarcity, and the quality. The average cost ranges from $100 to $400. However, expect to pay more for luxury and high-end vehicles. It would be best if you always replaced tie rods in pairs.

Are tie rods easy to replace?

Replacing tie rod ends refers to repairing an integral part of a vehicle’s steering mechanism. With a few basic tools and a little bit of know-how, this is a procedure that anyone, with a little bit of automotive experience, can perform on their own.

Can I drive with a bad tie rod?

In the worst case scenario when a tie rod completely fails, the wheel will break free of the steering assembly which then causes the vehicle to lose the ability to steer. At the first sign of any wear to the tie rods, steering is already at risk and the vehicle is not safe to drive.

Is fixing a tie rod easy?

Replacing tie rod ends refers to repairing an integral part of a vehicle’s steering mechanism. With a few basic tools and a little bit of know-how, this is a procedure that anyone, with a little bit of automotive experience, can perform on their own.

How much does it cost to replace a tie rod on a Ford f150?

Labor costs are estimated between $53 and $67 while parts are typically priced around $142.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment