The Chevy Blazer has an engine oil capacity of either 5 or 6 quarts, depending on the model year and type of engine installed. The recommended oil type for the Chevy Blazer is SAE 0W-20 synthetic blend motor oil with API Certification marks SM/CF or SN/GF-4.
Contents
- How much oil does a 2.0 liter engine take?
- What oil does a Chevy Blazer use?
- How much oil goes in a 3.7 L V6?
- How much oil does a 2.0 engine hold?
- How many quarts of oil does a V6 engine take?
- How much oil does a 4.3 L Chevy Blazer take?
- How much oil does a Chevy Blazer v6 take?
- How much oil does a 2.0 L Chevy Blazer take?
- How many cubic inches is a 4.3 V6 Chevy engine?
- What oil goes in a 4.3 V6 engine?
How much oil does a 2.0 liter engine take?
5.7 qt
Capacities and Specifications – 2.0L EcoBoost
| Item | Capacity |
|---|---|
| Engine oil (with oil filter). | 5.7 qt (5.4 L) |
| Engine coolant. | 8.5 qt (8 L) |
| Brake fluid. | Between MIN/MAX on brake fluid reservoir |
| Rear differential fluid (All Wheel Drive). | 2.4 pt (1.15 L) |
What oil does a Chevy Blazer use?
Mobil 1 – High Mileage Full Synthetic 5W-30 Motor Oil, Protection for 10K miles, 5 Quart (Part No. 120769)
How much oil goes in a 3.7 L V6?
6.0 qt
Capacities and Specifications – 3.7L
| Item | Capacity |
|---|---|
| Engine oil (with oil filter) | 6.0 qt (5.7 L) |
| Engine coolant | 11.7 qt (11.1 L) |
| Brake fluid | Between MIN/MAX on brake fluid reservoir |
| Rear differential fluid (All Wheel Drive) | 2.4 pt (1.15L) |
How much oil does a 2.0 engine hold?
Engine Oil Capacity and Specification – 2.0L EcoBoost
| Variant | Including the Oil Filter |
|---|---|
| All. | 5.5 qt (5.2 L) |
How many quarts of oil does a V6 engine take?
Typically, engines need five to eight quarts of oil. However, the size of your engine can impact how much oil is required. For example, a 4-cylinder oil engine may require around five quarts of oil, whereas a 6-cylinder oil needs six quarts.
How much oil does a 4.3 L Chevy Blazer take?
Oil Grade: SEO23
| Viscosity: | All TEMPS….5W-30 – SAE 5W-30 is preferred. Above 0 F .10W-30 |
|---|---|
| Capacity: | With filter 4.5 quarts. After refill check oil level. |
How much oil does a Chevy Blazer v6 take?
6 quarts
Oil Grade: SEO20
| Viscosity: | All TEMPS….5W-30 Below -20 F .0W-30 |
|---|---|
| Capacity: | With filter 6 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…18 ft/lbs |
How much oil does a 2.0 L Chevy Blazer take?
5.3 quarts Initial Fill.
How many cubic inches is a 4.3 V6 Chevy engine?
262 cu in
The 4.3 L (262 cu in) V6 has a 4 in × 3.48 in (101.6 mm × 88.4 mm) bore and stroke, identical to the 350 cu in (5.7 L) Chevrolet V8 engine. To create a true even-fire engine, Chevrolet produced a crankshaft with 30-degree offsets between each rod pin.
What oil goes in a 4.3 V6 engine?
SAE 5W-30
The 4.3-liter V6 engine on this year’s Silverado uses SAE 5W-30 viscosity grade motor oil. If your 2024 Silverado is powered by a 5.3-liter V8 engine, it’s important to use SAE 0W-20 viscosity grade motor oil. Behind the wheel of Chevy’s mighty 6.2-liter V8 engine? It will require SAE 0W-20 viscosity grade engine oil.
