AHG Auto Service » Make » Ford » How much transmission fluid does a 2005 Ford Explorer take?

How much transmission fluid does a 2005 Ford Explorer take?

Transmission Fluid Capacity for 2005 Ford Explorer
The 2005 Ford Explorer requires 12.7 quarts of transmission fluid for the 5-speed automatic transmission.
The recommended automatic transmission fluid for this vehicle is Mercon V ATF. It’s important to note that when changing the transmission fluid at regular intervals, only around a third of the total transmission fluid is replaced, so for regular maintenance, around a gallon (or perhaps a bit more) is needed.
It’s also worth mentioning that the 2005 Ford Explorer does not have a transmission dipstick. The only way to check the transmission fluid level is by a check valve located on the transmission oil pan.

How much transmission fluid does a 2006 Ford Explorer need?

The capacity for transmission fluid on the 2006 Ford Explorer is 11 quarts.To change the transmission fluid You will want to first make sure the car is level on the ground and then pop the hood open. Now locate the transmission fluid container, it should be on or near the transmission itself, and find the dipstick.

How many quarts of transmission fluid does a Ford transmission hold?

Transmission Fluid Capacity
Transmission (w/ Stock Pan) # of Quarts
Ford C4 5.5
Ford C6 7
Ford AOD/AODE 6.5

How many quarts of transmission fluid does a 2006 Ford Explorer take?

11.2 quarts
For Automatic Transmission: 6R60….MSP

Capacity: 6 speed 6R60 Total Fill 11.2 quarts.
Capacity: 5 quarts Initial Fill.

How many quarts drain and fill transmission fluid?

How Much Transmission Fluid Do I Need in My Car?

City Car, Family Car, Sedan 1.8 – 10.3 US quarts
Microcar 2.5 – 6.3 US quarts
Minivan, Crossover Utility Vehicle (CUV) 2 – 9.7 US quarts
Pickup, Commercial Vehicle 2.2 – 12 US quarts
Sports Utility Vehicle (SUV), Subcompact Car 3.5 – 17.1 US quarts

How much transmission fluid does a 2004 Ford Explorer take?

12.7 quarts
Automatic Transmission Fluid
Capacity: 5 speed 5R55S Total Fill 12.7 quarts.

How many quarts of transmission fluid do I need for a Ford Explorer?

6 quarts, most likely you will get 5-5.5 out with a filter change. Once you get it buttoned up let it idle for a while and cycle through reverse, drive and park to check the level.

What kind of transmission fluid does a 5R55S take?

This Motorcraft 5R55S transmission service kit replaces your clogged filter, with a new filter, to ensure no harmful debris will be swimming around the new fluid. 13 quarts of Motorcraft Mercon-V automatic transmission fluid are included to fully replace your dirty fluid in both the case and torque converter.

How many quarts does a 5R55S transmission take?

Quickly and carefully install the T30 torx fill/check level plug and tighten to 89 in-lbs (10Nm). 5R55S/W transmissions behind 3.0L & 3.9L engines will have a dry fill capacity of 11.2 quarts.

Is 4 quarts enough transmission fluid?

Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.

How much transmission fluid do I add if empty?

If you notice the transmission fluid is a little low on the dipstick, start with a half a quart to a quart of transmission fluid. Recheck the level and add ¼ quart (or less) at a time until the level is up to the full or max mark.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment