How much transmission fluid goes in a 2007 Dodge Caliber?

To determine how much transmission fluid goes in a 2007 Dodge Caliber, we can refer to the search results.
According to the search results, the 2007 Dodge Caliber has a CVT (Continuously Variable Transmission) system. The transmission fluid level in a CVT-equipped Caliber is checked and filled through a plug on the side of the transmission. The fluid level should be at the bottom of the fill hole when the transmission is full.
Unfortunately, the search results do not provide a specific quantity of transmission fluid required for a complete fill. It is recommended to consult the owner’s manual or contact a Dodge dealership for the exact amount of transmission fluid needed for a 2007 Dodge Caliber.
Please note that it is important to use the correct type of transmission fluid specified in the owner’s manual to ensure proper operation and avoid damage to the transmission.
If you have further questions or need assistance with any other topic, feel free to ask!

How much transmission fluid does a Dodge Caliber hold?

If the transmission has no fluid at all, 8.1L (8.5 quarts) is the fill capacity.

What kind of transmission fluid does a 2007 Dodge Caliber take?

ATF+4
STP ATF+4 Automatic Transmission Fluid 1 Quart
1 Quart. With automatic transmission.

How do I know how much transmission fluid I have?

With the engine warmed up, leave the car idling in park on a level surface. Pull out the dipstick, wipe it clean, replace it slowly, and then pull it back out. Check the fluid level—how high the fluid comes up on the dipstick—against the “full” and “low” or “fill” marks on the dipstick.

Where should transmission fluid level be on dipstick?

Once you’ve cleaned the dipstick return the dipstick back to the original position. And remove it again doing. This will ensure a clear reading of the fluid. Check the level on the dipstick.

What transmission fluid does a Dodge Caliber take?

Valvoline – ATF+4® Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No. 822348)

How to check the transmission fluid level on a 2007 Dodge Caliber?

Checking trans fluid level requires warming the trans, using a scan tool to check the temperature reading of the thermistor on the valve body, using a chart to find the correct level of the fluid per the temperature, and then using a special dipstick labeled in millimeters to check the level.

How many quarts of transmission fluid does 2007 Dodge Caliber 2.0 take?

7.4 quarts
Automatic Transmission Fluid
7.4 quarts Initial Fill.

How much transmission fluid goes in a 2008 Dodge Caliber?

8.6 quarts
Automatic Transmission Fluid
CVT2 Total Fill 8.6 quarts.

How much transmission fluid does a 2009 Dodge Caliber take?

8.6 quarts
Automatic Transmission Fluid
Capacity: CVT2 Total Fill 8.6 quarts.

How many gallons does a 2007 Dodge Caliber hold?

13.6 gal
Used 2007 Dodge Caliber – Specs & Features

Fuel & MPG
EPA city/highway MPG	24/29 MPG
EPA combined MPG	26 MPG
Range in miles (city/hwy)	326.4/394.4 mi.
Fuel tank capacity	13.6 gal.