How wide is the rear axle on a 1960 Ford Falcon?

Rear Axle Width of a 1960 Ford Falcon
The rear axle width of a 1960 Ford Falcon depends on the engine type. Falcons equipped with six-cylinder engines had a 7.25-inch rear axle assembly, while V-8-powered Falcons had an 8-inch rear axle assembly.
Please note that the information provided is specific to the 1960 Ford Falcon model and may not apply to other years or models of the Falcon.
I hope this helps! Let me know if you have any other questions.

What is the width of the rear axle on a 63 Falcon?

The 1963 Falcon and Comets Rear Axles as well as the 1960, 1961, 1962 7 1/4 Axels are suppose to be 55.8 Inch Wide.

How wide is a 1964 Falcon rear end?

Re: 64 rear end width
Here it is again,64/65 Comet/Falcon 8″ rearend is 58 inches wide! You will need to narrow an 8.8 to fit,most people remove the long axle tube and axle and replace it with a second narrow side tube and axle!

How wide is a 1963 Falcon rear end?

A stock 63 falcon V8 is 56 inches, the narrowest 8″ ford made. Approximate rear end widths measured from backing plate to backing plate.

How wide is a stock Ford 9-inch rear end?

These axles are 65 inches wide from wheel mounting surface to wheel mounting surface (a 68-inch-wide E-series van version is also common), feature the legendary 9-inch diameter ring gear, large Timken set 20 axle bearings, semi-floating 28- or 31-spline axleshafts, drum brakes, and a 5-on-5.5 lug pattern.

What is the width of the axles on a 1963 Ford Falcon?

The 1963 Falcon and Comets Rear Axles as well as the 1960, 1961, 1962 7 1/4 Axels are suppose to be 55.8 Inch Wide.

How wide is a Ford 9 inch rear axle?

The 9” rear axle was manufactured in seven different housing widths, from 57-1/4” to 69-1/4” wide, any of which may be ideal for a particular chassis. Determine housing width by measuring the distance between the axle flanges located on the outward end of each axle tube.

What is the width of the axles on a Ford Falcon?

56.5″
The standard width is 56.5″ Axle Flange to Axle Flange but custom widths are available for mini-tubbed cars.

How wide is a 1963 Ford Falcon rear end?

Guest. Hi Wheelzzs, This might be of some help. A stock 63 falcon V8 is 56 inches, the narrowest 8″ ford made.

How wide is a Ford 9 axle?

Ford 9 Inch Rear End Widths and Potential Donors

Axle Width	Year Model
63.00	1972-1979 Ford Full Size & Intermediate
63.50	1967 Fairlane
65.25	1973-1986 Ford F-150 Pickup
65.25	1973-1986 Ford Van 3/4 ton

What is the width of the rear end of a 65 Ford Falcon?

The 1964 & 65 Falcon and Comets V8’s had a 58 inch wide 8 inch axle. The match from that is the 1977 to 1981 Granada / Monarch had both the 8 and 9 inch axles or the Lincoln Versailles 9 inch rear end the bonus is that they also have Disk Brakes.