Specifications of the Ford Cortina GT
The Ford Cortina GT was a mid-size sedan produced by Ford from 1963 to 1970. Here are the specifications of the Ford Cortina GT:
– Engine: The Cortina GT was equipped with a 1.6-liter inline-4 engine.
– Power: The engine produced 88 bhp (brake horsepower) at 5400 rpm.
– Torque: The Cortina GT had a torque output of 97 lb-ft at 3600 rpm.
– Transmission: It came with a 4-speed manual gearbox, with an optional automatic transmission available.
– Driven Wheels: The Cortina GT had rear-wheel drive.
– Brakes: The front brakes were discs, while the rear brakes were drums.
– Suspension: The front suspension used MacPherson struts, and the rear suspension featured leaf springs and a live axle.
– Dimensions: The Cortina GT had a length of 14 feet, a width of 5 feet 4 inches, and a weight of 2001 lb.
– Performance: The top speed of the Cortina GT was approximately 98 mph, and it could accelerate from 0 to 60 mph in 12.5 seconds.
– Fuel Consumption: The estimated fuel consumption for the Cortina GT was 27 mpg.
Please note that these specifications are for the Ford Cortina GT model and may vary slightly depending on the specific year and trim level.
Contents
- What Ford GT went 300 mph?
- How fast was a Lotus Cortina?
- What was the American equivalent to the Ford Cortina?
- How fast is the Ford Cortina?
- How much horsepower does the Ford GT motor have?
- What engine does a Ford Cortina have?
- What is the speed of the Ford GT?
- How much HP did the Ford GT have?
- What is the rarest Ford Cortina?
- How much horsepower does a Cortina GT have?
What Ford GT went 300 mph?
M2K Motorsports made history when their Ford GT made a 300mph standing-mile pass. We go under the hood of this amazing machine and talk power with the team behind the record. Back in early 2014, Mark Heidaker and Kevin Kesterson were putting the finishing touches on their new shop, M2K Motorsports.
How fast was a Lotus Cortina?
Behind the wheel of the Lotus Cortina, you could achieve top speeds of 104 mph, with acceleration from 0 – 60 mph in 11 seconds.
What was the American equivalent to the Ford Cortina?
But back in 1964, its USDM equivalent would be the Ford Fairlane. While the Fairlane was 5,002 mm (197“) long, hulking sedan riding on a 2,934 mm (115.5“) wheelbase, with a 2.8-litre straight six (145hp) as a base engine (a 4.7/289 c.i. V8 with 271hp was available), the Cortina was a different beast altogether.
How fast is the Ford Cortina?
Ford Cortina Mk I
| Performance (approx) | ||
|---|---|---|
| Model | Cortina 1200 | Cortina 1500 |
| Top Speed | 75 mph | 82 mph |
| 0-60 mph | 22.0 seconds | 20.0 seconds |
| Fuel Consumption | 38 mpg | 34 mpg |
How much horsepower does the Ford GT motor have?
660 horsepower
Pumping out 660 horsepower and 550 pound-feet of torque, the V-6 is mated to a seven-speed dual-clutch automatic transmission. While the last version we tested had a few less horses, it still posted supercar-worthy acceleration times.
What engine does a Ford Cortina have?
The Ford Cortina Mk IV 1600 GL has a Inline 4, Petrol engine with 1593 cm3 / 97.2 cu-in capacity.
What is the speed of the Ford GT?
216 mph
Performance. The new GT has a claimed top speed of 216 mph (348 km/h), and has a power to weight ratio of 0.43 hp (0.32 kW) per kilogram. In steady-state cornering on a skidpad, the GT can achieve 1.11 g of lateral acceleration, and the car is capable of braking from 70 mph (113 km/h) to a stop in 145 ft (44 m).
How much HP did the Ford GT have?
660-horsepower
Its carbon-fiber body and its 660-horsepower 3.5L EcoBoost® V6 engine are the ultimate expressions of technological innovation.
What is the rarest Ford Cortina?
UK’s rarest cars: 1971 Ford Cortina 1600L Mk3 Estate, one of fewer than 100 left. The Ford Cortina Mk3 belongs to a specific period of social history; one where many Britons regarded Blue Nun and After Eight Mints as the peak of sophistication.
How much horsepower does a Cortina GT have?
The most powerful version of this engine (used in the GT Cortina) was 1498 cc (1500) and produced 78 bhp (58 kW).
