AHG Auto Service » Make » Ford » What engines were available in 1959 Ford Galaxie?

What engines were available in 1959 Ford Galaxie?

Engines Available in the 1959 Ford Galaxie
The 1959 Ford Galaxie had the following engine options:
– Inline 6 (3654 cc | 223.0 cu in. | 3.7 L.) with 145 BHP (106.72 KW) @ 4000 RPM
– V 8 (4785 cc | 292.0 cu in. | 4.8 L.) with 200 BHP (147.2 KW) @ 4400 RPM.
These were the available engine options for the 1959 Ford Galaxie.

What engine did the Ford Galaxie have?

Galaxie engine choices included one straight six, three Y-block V8s, and two FE series V8s. Customers could back those engines with a two-speed automatic transmission, a three-speed auto, or a three-speed manual trans. The wheelbase was 118 inches, and had an overall length of 208 inches and width of 76.8 inches.

What is an R code Galaxie?

The R-Code Galaxie Lightweights
Manufacturers stuffed the largest-possible engines into their full-sized two-door models to create true performance versions. To meet FIA and NASCAR displacement rules, these immensely powerful motors were limited to seven liters, or just over 427 cubic inches.

What is the difference between a Ford Galaxie and a Ford Galaxie 500?

Technically speaking, the Ford Galaxie became the Galaxie 500 only when it started carrying a new Ford engine. This mill offered one of the biggest displacements of the time, the 7.0-liter “Thunderbird” V8, and came with a 345 horsepower rating. While the engine was introduced in 1966, it carried on for 1967 as well.

What engine came in a 1959 Ford Galaxie 500?

Technical Specifications:
Model: Fairlane 500 Galaxie Skyliner. Engine: 352 ci/300 hp. Transmission: Cruise-O-Matic. Body Style: 2DR Retractable Hardtop.

What engines came in the Ford Galaxie 500?

The 351 2v V8 was now standard equipment on all full-sized Fords save for the lower-line Custom & Custom 500 versions where the 240 straight six was still the base power plant with a 302 2v V8 and up still offered as options. The optional 390 2v FE V8 was replaced mid-year by a new 335 series 400 2v V8.

What is the rarest Ford Galaxie?

Lot #425 – The first year Galaxie 500, 1962, is the most rare and elusive of all Galaxies. Even more rare, this car is equipped with its original 390ci Z-code high-performance 4-barrel engine with original factory cast-iron headers and ultra-rare FoMoCo aluminum intake manifold.

What size engine was in a 1959 Ford Fairlane?

Engine & Transmission

V 8
Displacement : 4785 cc | 292.0 cu in. | 4.8 L.
Power : 225 BHP (165.6 KW) @ 4400 RPM
Bore : 4.0 in | 102 mm.
Stroke : 3.3 in | 84 mm.

What engines were available in the 1959 Ford Fairlane?

As in 1958, all full-size ’59 Fords except the Skyliner were offered with Ford’s standard 223-cid six-cylinder engine. “Thunderbird” V8s of up to 352-cid were again available. Excepting the occasional Skyliner, the distinctive but rust-prone 1958 Fairlanes are uncommon today. The ’59s have seemingly fared better.

What is the rarest Ford engine?

The Ford 427 SOHC Cammer V8 is one of the rarest and most desirable big block V8 engines ever made. Unusually for an American V8 it has overhead cams rather than pushrods as it was built specifically for racing.

How much horsepower does a 1959 Ford Galaxie have?

The Fords could be had with the large, high-compression FE block 352 cubic inch, 300-horsepower V-8, but most buyers opted for the more economical FE 332, with 225 horsepower, or the Y 292, with 200 horsepower.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment