The lug pattern on a Toyota Matrix depends on the specific year and model. The bolt pattern, also known as the lug pattern, refers to the number of lug holes on the wheel and the diameter of an imaginary circle formed by the centers of these holes. It is important to match the bolt pattern of the wheels you want to buy with the bolt pattern of your Toyota Matrix to ensure proper fitment.
According to the search results, the bolt pattern for the Toyota Matrix can vary. Some sources mention a bolt pattern of 5×100 for certain years and models . Other sources mention a bolt pattern of 5×114.3 for certain years and models. It is recommended to verify the specific bolt pattern for your Toyota Matrix by referring to the owner’s manual or contacting a Toyota dealership.
Please note that the information provided is based on the search results and may vary depending on the specific year and model of the Toyota Matrix. It is always best to double-check with reliable sources or consult a professional for accurate and up-to-date information.
Contents
- What is the bolt pattern on a 2009 Toyota Matrix?
- Is 5×4 5 the same as 5×114 3?
- What vehicles have 5×5 bolt pattern?
- What lug pattern does Toyota use?
- Is 5×114 3 the same as 5×4?
- What’s the difference between 5×100 and 5×114 3?
- Is Ford and Toyota lug pattern the same?
- What is the lug pattern on a Toyota Matrix?
- Will Toyota rims fit a Chevy?
- What cars have the bolt pattern 5×114 3?
What is the bolt pattern on a 2009 Toyota Matrix?
Bolt Pattern: 5-114mm.
Is 5×4 5 the same as 5×114 3?
While the numbers are different, the wheels themselves feature the same exact bolt pattern. So if you’re on the hunt for 5×4. 5 wheels and someone says you really need a 5×114. 3, you’ll know that you’re both talking about the same thing.
What vehicles have 5×5 bolt pattern?
This was the bolt pattern used for Cadillac and other luxurious vehicles from the 1950’s. This includes classic Buick, Oldsmobile and Pontiac. So if you’re using a big Olds rear end, you likely have a 5×5 bolt pattern.
What lug pattern does Toyota use?
Toyota uses several bolt patterns across its different models. However, there are three bolt patterns that are most common: 5×114.3, 5×100, and 6×139.7.
Is 5×114 3 the same as 5×4?
The 5×114. 3 lug pattern, often referred to as 5×4. 5, is used mostly for older generation Jeep Wranglers (up to 2006), but is also common among other SUVs and cars, though offsets may need to run higher. Wheels available for this bolt pattern are numerous, so you will have a lot to choose from.
What’s the difference between 5×100 and 5×114 3?
5×114. 3 is going to give you more wheel options, as 5×100 is only used by a few manufacturers. However, 5×100 is probably used for more rally wheel setups, as they are typically smaller diameters (14,15,16), as opposed to the 114.3’s which are typically larger diameter wheels (16,17,18).
Is Ford and Toyota lug pattern the same?
Many Toyota vehicles share the same bolt pattern as Ford and Chrysler cars, which is 5 lugs x 4.5″ (114.3 mm) bolt circle. However there’s far more to a wheel “fitting” than simply the lug bolt pattern. Perhaps the biggest overlooked area is the center hole dimension.
What is the lug pattern on a Toyota Matrix?
Toyota Matrix Bolt Pattern – Generations:
| Generation | Production Years | Bolt pattern |
|---|---|---|
| I (E130) [2003 .. 2008] | 2003-2008 | 5×100 |
| II (E140) [2009 .. 2014] | 2009-2014 | 5×100 |
| 5×114.3 |
Will Toyota rims fit a Chevy?
Generally though the centre bore is 106mm or 4 & 1/8” in Toyota whereas the Chevy is 78.1mm or 3 & 3/32” . So a Toyota wheel may fit over the hub centre of a chev but may need a spacer adapter to ensure the wheel sits in the centre properly.
What cars have the bolt pattern 5×114 3?
The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.
