What is the axle ratio on a Ford Ranger?

The axle ratio on a Ford Ranger can vary depending on the specific model and year. To determine the axle ratio of a Ford Ranger, you can refer to the axle tag or the Federal Compliance Sticker.
According to the search results, the axle tag is bolted to the rear differential cover and provides information about the gear ratio and axle diameter. The Federal Compliance Sticker, located in the door jamb, also contains information about the axle code and gear ratio.
Here are some examples of axle ratios found in the search results:
– The axle tag on a Ford Ranger can indicate a 7.5-inch or 8.8-inch axle with various gear ratios, such as 3.27, 3.45, 3.73, or 4.10.
– The Federal Compliance Sticker can provide the axle code, such as F7, which corresponds to a 7.5-inch axle with a 4.10 limited slip .
It’s important to note that the axle ratio can vary depending on the specific model, year, and configuration of the Ford Ranger. To determine the exact axle ratio for a specific Ford Ranger, it is recommended to refer to the vehicle’s documentation or consult with a Ford dealership.
Please keep in mind that the information provided is based on the search results and may not cover all possible axle ratios for the Ford Ranger.

Where do I find my axle gear ratio?

Check the Differential Cover
The axle may have a sticker, and on the differential cover, you might have a small metal tag that’s sticking out that will have the gear ratio stamped on it.

Are 3.73 or 4.11 gears better?

The 4:11 Gears will get you faster acceleration higher rpm at any given speed and increased fuel consumption. The 3:73 Gears will give you decent acceleration, lower rpm at any given speed and improved fuel consumption.

How do I find my Ford axle ratio?

To find the axle code:

1. View the Safety Compliance Certification Label on the driver’s side, front or rear door panel.
2. Find the word “AXLE” under the bar code.
3. Find the two-digit code under “AXLE.”

Is a 3.73 axle ratio good?

The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73. This range provides good acceleration for V8 gas and diesel engines.

What is the rear axle ratio of a 2003 Ford Ranger?

3.73
Notes: Rear, Drive Axle Assembly. Gear ratio 3.73. With 7.5 Ring Gear.

How do you know what ratio your diff is?

On the axle you might have a sticker, and on the differential cover you might have a little metal tag that’s sticking out. That will have the gear ratio stamped right on that.

Can I find gear ratio by VIN?

You don’t. That information is not contained in the VIN, UNLESS a specific model only gets one rear end ratio. VIN tells country of manufacture, vehicle make, class, engine type, size, date of manufacture, plant and serial number. That is the ONLY information contained by the VIN.

Should I get 3.73 or 4.10 gears?

There is only a 10% difference between 4.10 and 3.73 gears. Unless you need to tow heavy loads, I would keep the 3.73 gears. Or maybe if you are going to big, big tires. Otherwise you probably won’t notice the difference.

What is the best differential gear ratio?

The most popular rear end ratio in trucks today is the 3:55, which sort of averages towing power and fuel economy. This is a good ratio for the occasional towing or hauling individual. For a person who tows more often, and heavier loads, the 3:73 or 4:10 may be more appropriate. 2023 Ford Super Duty F-250 Tremor.

What is the front diff ratio of the Ford Ranger?

FORD RANGER DIFFERENTIAL CENTRE FRONT, 3.0, DIESEL, AUTO T/M, PJ-PK, 3.727 RATIO.