AHG Auto Service » Make » Lexus » What is the engine code for a 2002 Lexus ES300?

What is the engine code for a 2002 Lexus ES300?

The engine code for a 2002 Lexus ES300 is 1MZ-FE.

Should I use full synthetic oil in a Lexus?

Since Lexus is the luxury brand of Toyota, new Lexus models need full synthetic Toyota genuine oil. You can put conventional oil in your engine, but we do not recommend it. Most new Lexus models require Toyota Genuine Motor Oil SAE 0W-20, which is a full synthetic motor oil.

What is the code P1350 on a 2002 Lexus ES300?

The P1350 is a fault that is detected when the camshaft position sensor (bank 2 in this case) is not sending a signal to the ECM. It is usually caused by the sensor itself, its wiring to the ECM, the air gap between the sensor and the signal plate or the signal plate.

What oil brand is best for Lexus?

Toyota Genuine Motor Oil
Because the Lexus brand is owned by Toyota, most new Lexus models require Toyota Genuine Motor Oil SAE 0W-20. This is a type of synthetic motor oil. If you drive an older Lexus model, your vehicle may need Toyota Genuine Motor Oil 5W-30.

What oil does a 2002 Lexus ES300 take?

SAE 5W−30 is the best choice for your vehicle, for good fuel economy, and good starting in cold weather.

What repairs can fix the P0430 code?

Solutions. Any crack, rusted spot or other damage to your exhaust system can be the source of your P0430. In that case, you need to replace the particular length of pipe or your entire exhaust system to fix the problem.

What is the code p1350 on a Lexus?

That is an error code for the variable valve timing system, bank 2. Several things can cause the code like dirty oil or a broken valve actuator.

What is the code P0430 for 2002 ES300?

When the catalytic converter is clogged, it cannot efficiently convert the harmful pollutants in the exhaust gas into harmless gases. This can cause the downstream oxygen sensor to read lower than the upstream oxygen sensor, which triggers the P0430 code.

Why is the check engine light on in my ES300?

The most common reasons a Lexus ES300 has a check engine light are an emissions system component, a sensor, or a catalytic converter.

What is the code po13a on a Lexus?

P013A is an OBD-II error code that indicates a slow response time for the oxygen sensor in question, specifically Bank 1 Sensor 2. The sensor monitors the transition from a rich to a lean fuel mixture in the exhaust stream.

Can bad spark plugs cause a P0430 code?

If the misfire isn’t fixed and bad spark plugs replaced, it can damage the catalytic converter which will then trigger the P0430 code in the ECU.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment