What is the factory code for Ford Fusion?

Factory Code for Ford Fusion Keyless Entry
To obtain the factory code for your Ford Fusion keyless entry, you have a few options:
1. Check the Owner’s Manual: The factory code is usually included in the owner’s manual of your vehicle. It is printed on a wallet card that is left in the glove box.
2. Locate the Remote Anti-Theft Module (RAP): If you don’t have access to the owner’s manual, you can find the factory code on the Remote Anti-Theft Module, also known as the RAP. The RAP is located at the left driver’s side rear of the vehicle. You will need to remove the panel using a screwdriver to access the code.
3. Use the Two-Key Method: Another method to retrieve the factory code is by using the two-key method. Insert key #1 into the ignition and turn it on (without starting the car) for 5 seconds. Then, remove key #1 and insert key #2 into the ignition, turning it on for 5 seconds. The factory code will be displayed on the dash for a 10-second interval.
Remember, it’s important to have the factory code for your Ford Fusion keyless entry as it enables you to use the keyless entry feature on your car.
I hope this helps! Let me know if you have any other questions.

How do I find the door code for my Ford Fusion?

Insert a key into the ignition and switch the ignition on for a few seconds. Switch the ignition off and remove the key. Insert the second key into the ignition and switch the ignition on. The factory-set code will display for a few seconds in the instrument cluster located above your steering wheel.

What is key code for Ford?

A key code specifies which key will open a specific lock. Official Ford dealers can keep the key code of each Ford supplied by them for a number of years. The reason for this is to simplify the ordering of additional keys. These key codes will not always be stored.

Can you get factory door code from VIN number?

Recently, some car manufacturers have made it possible to access keyless entry codes through the vehicle identification number (VIN) number. This allows car owners to easily retrieve lost, damaged, or stolen key codes without having to go through the costly and time-consuming process of replacing keys or key fobs.

How do I find my Ford factory keypad code?

So you have three options four if you encounter if you include going to the dealership.

Is there a master code for Ford keyless entry?

If you have the owner’s manual to your vehicle handy, you can check it for the factory default code. This should be in the owner’s wallet card which is usually kept in the glove compartment. If the owner’s manual is lost, you can find the factory code on the label of the Remote Anti-Theft (RAP) module.

What is the Ford 5 digit factory code?

The 5 digit security code is usually in the glove department if you have not moved the owner’s wallet card. The 5 digit code can also be found on years 2011- 2018 on a white label inside passenger side fuse box, it will be the 5 numbers you need, followed by a letter.

How do I reset my Ford door code?

First you’ll punch in the factory. Code which will unlock the vehicle. Quickly press the 1 2 button after the code and you’ll hear the vehicle. Lock.

How to reset Ford Fusion keyless entry without factory code?

How to Reset Ford Door Code Without Factory Code

1. Press the 1 and 2 buttons on your keyless entry system.
2. Enter the new code.
3. Press the 1 and 2 buttons again to confirm.
4. Test the doors; at this point, they should lock and unlock themselves.

How do I reset my fusion door code?

Enter the five-digit factory-set code on the keypad. Press the 1-2 button on the keypad within five seconds. Enter your new five-digit code. The numbers must be entered within five seconds of each other.

Where is Ford factory-set code?

Ford used to put it on a sticker elsewhere in the truck, but I’m not aware of where. From the factory it is taped in the glove box under the rubber mat – you might look there. Some dealers store them in their lock box with the keys. They should have it.