AHG Auto Service » Make » Ford » What size are Ford wheel nuts?

What size are Ford wheel nuts?

The size of Ford wheel nuts can vary depending on the specific model and type of wheel. Aftermarket alloy wheel nuts for Ford cars are usually around 23-24mm wide, while genuine Ford alloy wheels have a slightly wider nut hole with a seat diameter of 28mm . It’s important to note that there are different thread sizes used by Ford cars, with M12 x 1.5 being the most common thread size. However, some Ford models like the S-Max and Galaxy use M14 x 1.5 thread size. Additionally, Ford Mondeo alloy wheel nuts typically have M12 x 1.5 thread, taper seat, and a 19mm hex size. It’s always recommended to check the specific requirements for your Ford model to ensure the correct fitment.

What size are the lug nuts on a Ford f350?

Dorman – Wheel Lug Nut: M14-1.50 Thread, Flanged, 2.067″ Length, Chrome (Sold by each) (Part No. 611-268)

What size are Ford F150 lug nuts?

Specification of F150 Wheel Nuts: 14×1. 5 Thread, 13/16 Hex, 40mm Height, Conical 60 Degree Seat.

How do I know my wheel nut size?

These components are sold in different thread and pitch sizes, and the correct one varies from car to car. Your owner’s manual should tell you what size to get – alternatively, you can use a thread pitch gauge to find out.

What is the standard wheel nut size?

The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

Does Ford use SAE or MM?

Are Ford bolts metric or standard? Yes. Ford has sourced both for various vehicle over the years. While it’s a general trend that the newest cars are all metric, there are stubborn applications where older “standard” bolts are still used.

What size impact wrench do I need to remove lug nuts?

1/2 inch
For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

Are Ford lug nuts metric or standard?

Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.

What is the socket size for lug nuts?

4) Socket Sizes
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size are Ford Falcon wheel nuts?

The wheel nut size of varies Ford Falcon generations are 1/2” – 20 UNF.

What is the most common truck lug nut size?

Most common commercial lug nut size, the 33mm is used for most medium and heavy duty trucks. Compare to 1-5/16” A secondary light truck lug nut size. Compare to 13/16” Most common light truck lug nut size.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment