What size are the wheel nuts on a Ford Edge?

Wheel Nut Size for Ford Edge
The wheel nut size for a Ford Edge can vary depending on the specific model year and trim. However, a common size for the wheel nut on a Ford Edge is 19mm. This size is commonly used for the lug nuts on the wheels of the vehicle.
It’s important to note that while this is a common size, it’s always best to verify the specific wheel nut size for your Ford Edge by referencing the owner’s manual or consulting with a certified mechanic or dealership for the most accurate information.
If you have a specific model year in mind, I can help you find the exact wheel nut size for that particular year.

Are all Ford wheel nuts the same size?

Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.

What size are the wheel nuts on a 2016 Ford Edge?

Eisen 14×1. 5 One-Piece Chrome OEM Factory Style Replacement Lug Nuts for 2015-2020 Ford Mustang Edge Stock Wheels.

What socket size are wheel nuts?

The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

What size are Ford wheel bolts?

This set of alloy wheel nuts are designed to fit Ford alloy wheels. With a 60 degree taper seat diameter 28mm. M12 x 1.5 thread size and 19mm Hex.

What size are the lug nuts on a Ford Edge?

McGard – Chrome Cone Seat Style Lug Nut Set (M14 X 1.5 Thread Size) – Box of 100 Lug Nuts (Part No. 69469)

What size socket for a Ford Edge lug nut?

The hex size of your 2023 Ford Edge lug nuts is 19mm (3/4″), so you would need a 19mm hex socket to fit. Whether you use a lug wrench, torque wrench, impact socket, or regular socket, you’ll need the correct size to remove or tighten 2023 Ford Edge lug nuts.

What size impact wrench do I need to remove lug nuts?

1/2 inch
For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

What size socket is a Ford lug nut?

To remove and install Ford F150 lug nuts, you’ll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.

What size are the wheel nuts on a Ford?

Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.

What size socket is a 2016 Ford Edge lug nut?

13/16″ hex
14 mm x 1.50 thread size, 13/16″ hex.