AHG Auto Service » Make » Chevrolet » What size is the oil plug on a 2011 Chevy Express?

What size is the oil plug on a 2011 Chevy Express?

The oil plug size for a 2011 Chevy Express may vary depending on the specific model and engine. However, based on the available information, the oil drain plug size for a Chevy Express is typically 15mm.
Please note that it’s always a good idea to consult the owner’s manual or contact a certified Chevrolet dealership for the most accurate and up-to-date information regarding your specific vehicle.

How much oil does a 5.3 Chevy Express take?

Oil Grade: SEO20

Viscosity: All TEMPS….5W-30 Below -20 F .0W-30
Capacity: With filter 6 quarts. After refill check oil level.
Torque: Oil Drain Plug…18 ft/lbs

What size is a Chevy oil drain plug?

15 mm
Dorman – Standard Engine Oil Drain Plug: M12-1.75 Thread, 15 mm Head, 1 Pack (Part No. 65430)

What kind of socket do you use for an oil drain plug?

3/8″ Drive 6 Pt.

Are all oil drain plugs the same?

Let’s get one thing straight: oil drain plugs are not universal. Just because an oil drain plug has the thread pitch you need for a vehicle, that doesn’t mean it will work with the oil drain pan. Here’s what you need to know about oil drain plugs and gaskets so you can select the right replacements.

What size is the oil drain plug on a 2011 Chevy 1500?

15 mm
Head size (SAE/metric): 15 mm. Thread size: M12-1.75.

Do all cars have the same size oil drain plug?

There is no universal drain plug size, but there are only a couple different sizes in common use. Auto shops do not need to replace the plug, it is almost always reuseable. The disposable part is just a sealing washer or gasket.

What size is the drain plug on 2011 GMC Sierra?

Notes: Oil drain plug M12-1.75 pilot point, inset gasket slim flange.

What kind of oil does a 2011 Chevy Express 1500 take?

Notes: Full synthetic high mileage. 5W-30.

How much oil does a 2011 Chevy Express van take?

Oil Grade: SEO20

Viscosity: All TEMPS….5W-30
Capacity: With filter 6 quarts. After refill check oil level.
Torque: Oil Drain Plug…18 ft/lbs

What size socket do I need for oil plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment