What size lug wrench do I need for a Ford Fusion?

To determine the size of the lug wrench needed for a Ford Fusion, we can refer to the information from the search results. According to the information found, the lug nut size for a Ford Fusion is 3/4″ or 19mm. This means that a lug wrench with a socket size of 3/4″ or 19mm should be suitable for removing and installing the lug nuts on a Ford Fusion.
Please note that it’s always a good idea to double-check the lug nut size on your specific vehicle, as there may be variations depending on the model year and wheel type.

What is the wrench on Ford Fusion?

The Ford Fusion will display a wrench light when there is a need to have the vehicle inspected. It means that, for some reason, the car’s computer is registering a fault code. The code itself will tell you what’s wrong with the vehicle. It works much like a check engine light but can apply to various areas of the car.

What size socket do I need to remove wheel nuts?

19mm socket is what you need – locking nut and standard all the same size.

What size wrench is a 2014 Ford Fusion lug nut?

12 mm x 1.50 thread size, 3/4″ and 13/16″ hex.

What size wrench is a 2015 Ford Fusion lug nut?

12 mm x 1.50 thread size, 3/4″ and 13/16″ hex.

What size socket is a 2013 Ford Fusion lug nut?

M12 x 1.5. 3/4 Hex.

What size socket is a Ford lug nut?

To remove and install Ford F150 lug nuts, you’ll need a 21mm socket. A standard 6-point 21mm socket is preferred over 12-point sockets since they grip better and are less likely to round off lug nuts. Make sure to use a torque socket.

What is the spec of the lug nuts on a Ford Fusion?

The lug nuts hex head is 19mm (meaning you use a 19mm socket to get them off) and yes, 100 ft/lbs for the torque spec.

What size socket do I need to remove lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.

What size socket is a 2012 Ford Fusion lug nut?

12 mm x 1.50 thread size, 3/4″ and 13/16″ hex. Refer to your owner’s manual or wheel manufacturer’s guide for correct thread size, seat style, length, hex and torque specifications. Improper installation can result in accident and/or injury.

What size lug wrench for Ford Fusion?

5 Lug Nuts & Lug Wrench.