Lexus LS430 Rotor Size
The front rotors on the Lexus LS430 have a size of 12.4 inches. Additionally, there are performance brake rotors available for the Lexus LS430 with a rear size of 14 inches.
Contents
- What is the spec of the Lexus LS 430?
- How do I measure my rotor size?
- Where is rotor size stamped?
- What was the Lexus LS430 called in Japan?
- How do I find the rotor size on a VIN number?
- What is the minimum thickness of rotors for ls430?
- What does LS stand for in Lexus LS?
- Do rotors have to be the same size?
- What is a good brake rotor thickness?
- How many cylinders does a LS 430 have?
What is the spec of the Lexus LS 430?
Engine Type (3UZ-FE) V8 Displacement 4.3 litres (4293 cc) Valvetrain DOHC 32 valves, Variable Valve Timing with intelligence (VVT-i) Acoustic Control Induction System (ACIS) and Electronic Throttle Control System with intelligence (ETCS-i) Bore x Stroke 91.0 x 82.5 mm (3.58 x 3.25 in.)
How do I measure my rotor size?
Measure the Rotor
So start with the front rotor. Take your tape measure and refer to the attached image to see an example of how to measure the rotor. Latch onto the bottom, then pull the tape measure upwards. Make sure you measure close to the center of the rotor – not the edge!
Where is rotor size stamped?
As indicated in our Rotor Minimum Thickness statement the specifications are usually stamped into the rotor hub while some OEM’s stamp it on the outside edge of the rotor (Figure 5). Sometimes due to road conditions (water, salt, sand, mud, etc.) these markings may become unreadable.
What was the Lexus LS430 called in Japan?
Toyota Celsior
A domestic-market version of the LS 400 and LS 430, badged as Toyota Celsior (Japanese: トヨタ・セルシオ, Hepburn: Toyota Serushio), was sold in Japan until the Lexus marque was introduced there in 2006.
How do I find the rotor size on a VIN number?
A vehicles rotor size is not identified in the vehicle VIN. I recommend you contact an auto parts store, provide them the year, make, and model of the vehicle and they will be able to provide you the rotor size.
What is the minimum thickness of rotors for ls430?
Standard thickness: 16.0 mm (0.630 in.) Minimum thickness: 14.5 mm (0.571 in.)
What does LS stand for in Lexus LS?
Luxury Sedan
LS = Luxury Sedan. Sep 24, 2022
What does LS stand for?
Do rotors have to be the same size?
No, each car manufacturer has a different size if brake rotor for the front and back depending on the size and type of the car. Hence th se are not universal and not Interchangeable.
What is a good brake rotor thickness?
Most new rotors start with a thickness or width of between 28-45mm, also known as its “nominal thickness.” The “minimum thickness” refers to how thin a rotor can be before it’s considered dangerous. You can typically find this information engraved on the side of the rotor (more on this later).
How many cylinders does a LS 430 have?
8 Cyl
8 Cyl. / 4 V per Cyl.
