What size wrench for Ford F150 lug nuts?

The lug nut size for a Ford F150 can vary depending on the year and model. However, based on the search results, it seems that the most common lug nut size for Ford F150 models is 14mm x 1.5 or 14mm x 2.0. This means that a 21mm socket is typically used to remove and install the lug nuts on most F150 models from 2004 to 2024.
It’s important to note that lug nut sizes can vary, so it’s always a good idea to double-check the specific lug nut size for your particular Ford F150 model and year to ensure the correct fit.

What size wrench for Ford lug nuts?

1/2” torque wrench and a 21mm socket. That’s all you need.

Are all Ford wheel nuts the same size?

Most Ford cars use M12 x 1.5 thread alloy wheel nuts with a 60 degree taper seat washer.

Is 13 16 the same as 21mm?

21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch.

What size are the lug nuts on a 2016 Ford f150?

14 mm x 1.50 thread size, 7/8″ hex. 4-pack, duplex acorn lug nut.

What size are the lug nuts on a 2015 Ford F150?

14 mm x 1.50 thread size, 13/16″ hex.

What size socket for 2014 f150 lug nuts?

The lug wrench/socket size used on an F-150 is 13/16″ or 21mm.

What mm is a 13 16 socket?

20.6mm
13/16″(20.6mm) Spark Plug Socket – Genius.

Will a 13 16 socket fit a 21mm nut?

But for the record, the OP’s mention of using a 13/16″ socket on a 21mm lug bolt is correct. 13/16″ = 20.64mm, so it’ll be snug on a 21mm hex, but it should work fine.

Are Ford lug nuts metric or standard?

Almost all Ford lug nuts are metric. The most common metric thread sizes of Ford wheel nuts are M14x1.

What size socket do I need to remove lug nuts?

If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.