AHG Auto Service » Make » Ford » What type of brake fluid goes in a Ford Taurus?

What type of brake fluid goes in a Ford Taurus?

The Ford Taurus uses DOT 3 brake fluid as standard. DOT 3 brake fluid is a common hydraulic fluid that can be found at any major auto parts store. It is recommended to check the brake fluid level every time you change the oil to ensure it is full. If you notice that the brake fluid is low, you should check the reservoir, the booster, and the lines where they meet each of the calipers on your vehicle for any leaks. Repairing brake leaks promptly is important to maintain brake performance and ensure your safety.
Please note that it’s always a good idea to consult your vehicle’s manual or contact a Ford dealership for specific information about your Ford Taurus’s brake fluid requirements.

Should I use DOT 3 or 4 brake fluid?

DOT 4 brake fluid. The primary differences between the two include the following: DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. DOT 4 brake fluid has higher dry and wet boiling points, making it safer for higher temperatures.

Is DOT 3 and DOT 4 brake fluid?

DOT 4 and DOT 3 Brake Fluids From the table above, we can see that the main difference between DOT 4 and DOT 3 brake fluids is that DOT 4 brake fluids have higher minimum dry and wet boiling points – and this is why majority of car makers recommend DOT 4 brake fluid over DOT 3 as it provides an extra margin of safety.

What kind of brake fluid does a Ford Taurus use?

Prestone DOT 3 Brake Fluid 32 ounce
32 oz. Dot 3.

Can I use DOT 3 and DOT 4 brake fluid?

Yes. DOT 3 brake fluid is compatible with DOT 4 brake fluid. However, DOT 4 offers a higher boiling point. DOT 5.1 is used in high-performance and heavy-duty applications due to its high boiling point.

What happens if I put DOT 4 instead of DOT 3?

The only thing you’ll need to do is completely purge the system of the old DOT3 fluid to take advantage of the DOT4 features (higher boiling point both dry/wet). The only real difference between the two is how hot they can get before they boil. The DOT4 will not harm your DOT3 system in any way.

What kind of brake fluid does a 2003 Ford Taurus take?

DOT 3 brake fluid
(1) Motorcraft High Performance DOT 3 brake fluid, P/N PM-1-C or equivalent meeting Ford specification WSS-M6C65-A1.

Can I use DOT 3 instead of DOT 4?

Yes. DOT 3 brake fluid is compatible with DOT 4 brake fluid. However, DOT 4 offers a higher boiling point. DOT 5.1 is used in high-performance and heavy-duty applications due to its high boiling point.

What happens if you put the wrong fluid in your brakes?

Brake systems use hydraulic fluid that’s specially formulated for the purpose. Substituting transmission or power-steering fluid, which are similar to each other, can affect the seals, damage the system, and possibly cause brake failure.

Does it matter what brake fluid you put in?

Although DOT 3 and DOT 4 fluids are all glycol-based, the chemical composition of each type of fluid is different, so it will have a different effect on the system. To make sure the system works as it should, the best thing to do is to keep using the brake fluid recommended by the manufacturer.

What kind of brake fluid does a 2001 Ford Taurus take?

Dot 3
Dot 3. 12 Ounce (oz) Capacity.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment