AHG Auto Service » Make » Ford » Where are sensors on Ford Explorer?

Where are sensors on Ford Explorer?

Ford Explorer Sensors
The Ford Explorer is equipped with various sensors located in different parts of the vehicle. Here are some of the key sensor locations:
1. TPMS Sensors: The Ford Explorer uses a direct Tire Pressure Monitoring System (TPMS) that includes sensors installed in the wheels. These sensors communicate tire pressure information to the vehicle’s Electronic Control Unit (ECU).
2. ABS Sensors: The Anti-lock Braking System (ABS) sensors on the Ford Explorer are located on the front and rear wheels. These sensors monitor wheel speed and provide information to the ABS system to help prevent wheel lock-up during braking.
3. Oxygen Sensors: The oxygen sensors in the Ford Explorer are responsible for monitoring the oxygen levels in the exhaust gases. The locations of these sensors may vary depending on the engine configuration, but typically, there are upstream and downstream sensors located before and after the catalytic converter .
4. Side Sensing System: The Ford Explorer also features a Side Sensing System, which uses sensors located on the front and rear bumpers. These sensors detect objects in close proximity to the vehicle and provide visual and audible warnings to the driver.
Please note that the specific sensor locations may vary depending on the model year and trim level of the Ford Explorer. For more detailed information, it is recommended to consult the vehicle’s owner’s manual or reach out to a Ford dealership for assistance.
I hope this information helps! Let me know if you have any other questions.

What is front and rear sensors?

Front and Rear Park Assist uses multiple ultrasonic sensors located on your front and rear bumpers. When you’re driving at low speeds, the sensors may detect objects up to 6 feet behind your vehicle and up to 4 feet in front of your vehicle.

Where is emission sensor located?

The sensor is typically located on the passenger side of the car, mounted directly onto the exhaust pipe near the catalytic converter.

What are the sensors on the side of the car for?

A blind spot detection system alerts the driver of vehicles and obstacles in blind spots around the vehicle. These blind spot sensors mount to the side of the vehicle to detect objects in the side blind spots.

Does Ford Explorer have front sensors?

All Explorers get rear parking sensors, while the Limited, King Ranch, and Platinum also have front parking sensors.

Where are the front sensors on a Ford Explorer?

They are not color coded at least not the 06. So um you just have to get a bright flashlight. And go look for them these sensors on the Ford Explorer.

How much does it cost to replace a MAP sensor on a Ford Explorer?

The average cost for a Ford Explorer MAP Sensor Replacement is between $77 and $104. Labor costs are estimated between $26 and $33 while parts are priced between $50 and $71. This range does not include taxes and fees, and does not factor in your unique location.

What are the sensors on the front of a car?

Front parking sensors are designed to aid drivers in maneuvering by emitting a more frequent sound as the vehicle gets closer to an object. This system is usually activated automatically when the vehicle is placed in reverse but can also be turned on manually.

Where is the map sensor located on a Ford Explorer?

Now to remove this it’s going to be very. Simple let’s start by removing the electrical connector.

What are the symptoms of a bad MAP sensor?

Look for these warning signs:

  • Rich air-fuel ratio: Look for rough idle, poor fuel economy, slow acceleration and a strong smell of gasoline (especially at idle)
  • Lean air-fuel ratio: Look for surging, stalling, lack of power, hesitation on acceleration, backfiring through the intake, and overheating.

Where are the 4 O2 sensors located?

Four-cylinder engines have two sensors, while V6 and V8 engines have four sensors. The upstream oxygen sensor(s) are located below the exhaust manifold flanges and above the catalytic converter. The downstream oxygen sensor(s) are located in the exhaust pipe, behind the catalytic converter.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment