Where is the drain plug on a Toyota Corolla?

The drain plug on a Toyota Corolla can be found in different locations depending on the specific component you are referring to. Here are the locations of the drain plugs for different parts of the vehicle:
1. Oil Pan Drain Plug: The oil pan drain plug is located on the bottom of the oil pan, which is attached to the engine. It is used to drain the engine oil during an oil change.
2. Transmission Drain Plug: The transmission drain plug is located on the transmission itself. The exact location may vary depending on the generation of the Corolla. For example, on a 10th generation Corolla, the transmission drain plug is located on the transmission pan.
3. Coolant Drain Plug: The coolant drain plug is located at the bottom of the radiator. It is used to drain the coolant from the cooling system.
Please note that the specific location of these drain plugs may vary depending on the model year and generation of the Toyota Corolla. It is always recommended to consult the vehicle’s owner’s manual for the exact location and instructions on how to perform maintenance tasks like draining fluids.
I hope this helps! Let me know if you have any other questions.

Contents

How often do you need to replace a drain plug?
How do you remove an engine drain plug?
Do you replace oil drain plug?
What size socket is a drain plug?
Where is the drain plug located?
Can drain plugs go bad?
What size wrench for Toyota Corolla drain plug?
What size socket is an oil plug Toyota Corolla?
Which one is the oil drain plug?
Where is the oil drain plug located on a Toyota Corolla?

How often do you need to replace a drain plug?

You don’t need to replace the drain plug but it’s smart to replace the drain plug gasket with each oil change.

How do you remove an engine drain plug?

Crawl under, and find the engine oil screw near the front. Where you plug in the socket, use the wrench to loosen the plug in a counterclockwise direction. Once relaxed, you can use your hand and remove the plug. The hot oil will begin to pour out.

Do you replace oil drain plug?

If it’s a copper crush washer, Hines says to flip it around and recrush it so it makes a proper seal. He also recommends you replace the drain plug itself after every oil change. If it’s continually reused, it could eventually round out, leaving you with a larger issue.

What size socket is a drain plug?

What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.

Where is the drain plug located?

The drain plug is a large nut or plug located under the oil pan at the bottom of the engine.

Can drain plugs go bad?

No. But if you tighten them too much you can strip the threads and it is a major problem if you only have one vehicle and the store to get the part to fix it is several miles away.

What size wrench for Toyota Corolla drain plug?

Engine Oil and Filter Change
After warming up the engine safely situate the vehicle so that you can access the drain bolt and oil filter housing. Place the drain pan beneath the engine and use the 14mm wrench or socket to remove the drain bolt and let drain.

What size socket is an oil plug Toyota Corolla?

All plugs have 14mm hex – just one wrench works for all.

Which one is the oil drain plug?

You should be able to see and reach a large nut or plug located under the oil pan at the bottom of the engine (see Figure 13-6). This is the oil drain plug. It unscrews with the aid of an adjustable wrench.