If the rear load lights on your Ford Transit Custom are not working, there could be a few possible reasons for this issue. Here are some potential causes and solutions:
1. Faulty bulbs: Check if the bulbs in the rear load lights are burned out or damaged. If so, you will need to replace them with new bulbs.
2. Daytime running lights: Some models of the Ford Transit have daytime running lights that cannot be disabled because they are considered a security feature. However, in other models, you can disable the daytime running lights through the car’s main menu and information display. You can try turning off the daytime running lights and see if that resolves the issue.
3. Cargo light switch: In some cases, the rear load lights may be controlled by a switch located near the reading lamps. Make sure this switch is in the correct position to control the cargo lamps.
4. Wiring or connection issues: Check the wiring and connections for any loose or damaged connections. Ensure that all the wiring is properly connected and there are no loose or damaged wires.
5. Fuse issues: Inspect the fuse box to see if any of the fuses related to the rear load lights are blown. If you find a blown fuse, replace it with a new one of the same rating.
If you have checked these potential causes and the issue persists, it is recommended to have your Ford Transit Custom inspected by a mechanic to diagnose and resolve the problem.
Please note that these suggestions are based on general troubleshooting tips and may not apply to every specific situation. It is always best to consult the owner’s manual or seek professional assistance for accurate diagnosis and repair.
I hope this helps! Let me know if you have any other questions.
Contents
- What does the interior fuse box do?
- Why are my rear lights not working?
- How do you turn off the cargo lights on a Ford Transit?
- Where is the interior light fuse on a Ford Transit Connect?
- What is the fuse for the interior lights on a Ford Transit Custom?
- Where is the fuse box on a Ford Transit Custom?
- What are cargo lights for?
- Why are all my back lights not working?
- How do you reset the light on a Ford Transit?
- Where is the fuse for my back lights?
What does the interior fuse box do?
The internal fuse box protects the interior cabin components, including lights, radio and powered controls.
Why are my rear lights not working?
If the bulb or socket isn’t the problem, the next check is the fuse or the light switch. Fuses for everything electrical, including your tail lights, are always found in the fuse box. They are usually located under the hood or in the cabin. Fortunately, you can fix this type of problem by replacing the fuse.
How do you turn off the cargo lights on a Ford Transit?
Off after it’s roughly about a minute so there’s a timer on those lights. And those lights will go out after about a minute. And there you go the lights have now switched. Off.
Where is the interior light fuse on a Ford Transit Connect?
The central junction box is located behind the glove compartment and the main relays are in the engine bay on the right as you look under the bonnet. The fuses you are looking for are located in the box behind the glove compartment. F31 5A for mirrors and F39 7.5A for internal lights.
What is the fuse for the interior lights on a Ford Transit Custom?
The fuse box where the interior lighting fuse is located is in the passenger area of the vehicle. There are two fuse boxes in the interior but the one You’re looking for is located under the left side driver’s dash.
Where is the fuse box on a Ford Transit Custom?
Hi guys Jamie from ANCA vans here today. We are looking at how to find a fuse books in a Ford Transit I’m working on the 2015. Model today so I’m just in the driver’s seat below the steering wheel in
What are cargo lights for?
Such a cargo lamp is useful for lighting the bed of a pickup truck to allow an operator to better see in low ambient light conditions.
Why are all my back lights not working?
In some cases, your tail lights going out could indicate that you have an issue with the battery. Make sure your battery contacts are clean and that it’s fully charged. Whether it’s a burned-out bulb or a problem with a fuse or wiring, this problem is usually easy to fix fairly quickly.
How do you reset the light on a Ford Transit?
Together after about 15 seconds the light will start to flash. The service light is now reset. The next step is particularly important for lighter transients which are fitted with a Powertrain module.
Where is the fuse for my back lights?
On older cars, the fuse box is located under the dash. On most newer cars it can be located under the hood or the dash. The manual will have a labeled picture of the fuse box showing which fuse is which. Making sure the ignition is off, take the cover off of the fuse box and locate the taillight fuse.
