AHG Auto Service » Make » Chevrolet » Why does my Chevy Equinox shake when I brake?

Why does my Chevy Equinox shake when I brake?

Why does my Chevy Equinox shake when I brake?
If your Chevy Equinox shakes when you brake, there are a few possible causes that you should consider. One common cause is warped brake rotors. When the rotors become warped, they can cause vibrations that are felt in the steering wheel and throughout the vehicle when the brakes are applied. Another potential cause is worn brake pads. If the brake pads are worn past their useful life or if they are dirty, they may not make proper contact with the rotors, resulting in shaking when the brakes are applied. Additionally, a faulty wheel bearing can also cause shaking when braking. It’s important to note that these are just a few possible causes, and a proper diagnosis by a qualified mechanic is recommended to determine the exact cause of the issue.
How to address the issue:
To address the shaking when braking in your Chevy Equinox, it is recommended to take the following steps:
1. Inspect the brake rotors: If the rotors are warped, they may need to be resurfaced or replaced. A qualified mechanic can assess the condition of the rotors and recommend the appropriate course of action.
2. Check the brake pads: If the brake pads are worn or dirty, they may need to be replaced. It’s important to ensure that the brake pads are making proper contact with the rotors for effective braking and to prevent shaking.
3. Inspect the wheel bearings: Faulty wheel bearings can cause shaking when braking. A mechanic can inspect the wheel bearings and determine if they need to be replaced.
4. Consider other potential causes: While warped rotors, worn brake pads, and faulty wheel bearings are common causes of shaking when braking, there may be other factors at play. It’s important to have a qualified mechanic perform a thorough inspection to identify any additional issues that may be contributing to the problem.
Remember, a proper diagnosis by a qualified mechanic is essential to accurately identify and address the cause of the shaking when braking in your Chevy Equinox. They will be able to provide you with the most appropriate solution based on their assessment of the vehicle.
I hope this information helps! Let me know if you have any other questions.

Is it bad to drive with pulsating brakes?

Pulsating or surging brakes is a sign that ultimately occurs as a drastic byproduct of friction. This friction is caused due to two metallic components rubbing against each other. Overall, a pulsating brake must be looked at urgently since brakes need to be optimum for safety.

What causes brake shudder?

Brake shudder arises as a result of issues with the brake discs. Namely, when the brake discs have been affected by Disc Thickness Variation (DTV). This refers to the uneven wear of brake discs and is the result of rotor run out.

What is the brake issue on the Chevy Equinox?

The rear brake calipers may have been produced with an incorrect lubricant, potentially causing the rubber seals to swell and the brakes to drag. Brake drag may result in overheating of the brake pads, affecting the braking ability and increasing the risk of a crash.

Why is my Chevy Equinox shaking?

Damaged or worn-out suspension components can exacerbate shaking or vibration issues. This includes items like control arms, bushings, struts, and shocks. Improperly balanced wheels can cause vibrations, especially at higher speeds, though it’s less common for this to manifest primarily during braking.

How much does it cost to fix warped rotors?

The correction for warped rotors can be machining them to regain a flat, consistent surface again, but the best solution is to replace both brake rotors on the affected axle. With an average cost of $60 to $150 per pair, it’s a relatively cost-effective fix.

Why does my car brake pedal shake when braking?

If your brake pads are contaminated with dirt, oil, or another substance, pedal vibration will occur during the clamping of the pads onto the rotor. Additionally, damaged or excessively worn brake pads can also be one of the causes of a vibrating pedal.

How do I fix my car shaking when I brake?

How to fix the shaking issue. First, make sure each of your tires doesn’t have any worn parts. If your tires are badly worn, then it’s time to change your tires. If your car is vibrating because of the worn brake rotors and pads, take your car to a professional repair shop to have them replaced or fixed.

Why does my Chevy Equinox brakes pulsate when I brake?

Normally this pulsating means your brake rotors are warped ( from heat and wear ). To have your rotors and pads replaced , will probably fix your problem.

How do I know if my rotors are out of balance?

Unbalanced Rotors
If you feel your steering wheel or brake pedal shake or vibrate, the issue could be related to your rotors. The brake pads press against the rotors to slow down your vehicle, and if the rotors are not balanced, it could cause the vibration you feel in the steering wheel and pedal.

Why does my car shake when I brake from 60 to 80?

The most common cause of a car shaking when braking are brake rotors that have varying thicknesses. If your vehicle has drum brakes, shaking under braking can also be caused by worn-out brake drums. Loose wheel bearings, loose suspension, and worn-out brake pads can also cause your vehicle to shake while braking.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment