AHG Auto Service » Make » Ford » Why is my AC not working in my Ford Explorer?

Why is my AC not working in my Ford Explorer?

Why Your AC Might Not Be Working in Your Ford Explorer
If your AC is not working in your Ford Explorer, there could be several reasons for this issue. Some common causes that hinder the normal operation of the air conditioning system in your Ford Explorer include:
1. Refrigerant Leak: A refrigerant leak can lead to the AC not working properly in your Ford Explorer.
2. Dirty or Clogged Components: Dirty or clogged components such as the cabin air filter, condenser, or evaporator can impact the performance of the AC system.
3. Defective Compressor: A defective compressor can also be a reason for the AC problems in your Ford Explorer.
4. Electrical Issues: Faults in the electrical system, including issues with the blower motor, blend door actuator, or other electrical components, can also cause the AC to malfunction.
5. AC Compressor Not Turning On: If the AC compressor is not turning on, it can lead to the AC not working properly in your Ford Explorer.
6. Blower Motor Malfunction: A malfunctioning blower motor can prevent the proper flow of air through the AC vents in your Ford Explorer.
It’s important to address these potential issues to ensure that your Ford Explorer’s AC system is functioning optimally. If you’re unable to diagnose or fix the problem yourself, it may be beneficial to seek professional assistance to identify and resolve the specific issue affecting your vehicle’s AC system.
I hope this information helps you understand some of the possible reasons why your Ford Explorer’s AC may not be working as expected. If you need further assistance, feel free to ask!

Is there an AC reset button?

Look for it first around on the exterior of your machine, especially along the bottom edge near the ground. An AC’s reset button is typically red and visible, so it should be easy to spot. If you don’t see a reset button on the outside, it could be located inside the unit behind the service panel.

How do you reset the AC on a Ford Explorer?

What is a blend door actuator. As we already mentioned the blend door actuator is a component of the HVAC. System they are referred to as blend doors because they help to blend hot.

How do I fix my AC blowing hot air?

AC Blowing Warm Air? Try These 3 Solutions First

  1. Step 1: Check Your Thermostat. Switch thermostat mode to “Cool” Is the AC fan set to “Auto” or “On”?
  2. Step 2: Check Your Breaker/Fuse Box. Locate HVAC Breaker or fuse. Ensure HVAC breaker or fuse has not been tripped or blown.
  3. Step 3: Check Filter. Unplug AC Unit.

How do I reset my Ford air conditioner?

hold down your power and your defrost button, then you’re just going to let go. power button again up here. once it says 88 degrees on both sides, it’s finished resetting your system.

Why is my car AC not blowing cold air from the vents?

Why is my car air conditioner not blowing cold air? There can be a number of reasons why you can air conditioning is not blowing cold air. The most common reasons could be a clogged filter, cooling fan problem, radiator trouble, or it could simply be that you need to recharge (regas) your air conditioning.

Why is my Ford AC not blowing cold?

If you notice that the air conditioning system in your Ford car is not cooling as it should, it could be due to a refrigerant leak. Refrigerant is the substance that cools the air inside the system, and a leak can cause the air conditioning system to malfunction.

Where is the AC reset button?

It’s a small, red button usually located on or around the unit. The button should have a clear ‘reset’ label. Once you find the button, press it for around three seconds and observe the AC. Check whether the AC kicks on immediately and if it doesn’t, press the button again for another three seconds.

Why is my AC blowing hot air Ford Explorer?

The top three reasons your car AC is blowing hot air are: Loss of refrigerant. Broken condenser. Electrical system issues.

Why is my AC in my car not blowing very cold air?

Your vehicle’s air-conditioning not working is likely caused by a failing compressor or a freon leak. While these are the most obvious reasons for your air-conditioning not working inside your vehicle, it might be anything as simple as a bad belt or a dirty cabin air filter.

Why is my AC in my car suddenly blowing hot air?

Your system, as the amount of refrigerant gas decreases through the leaks, will slowly start to feel warmer. You may not even notice the change. However, one day the system will have lost enough gas, that it no longer functions. That’s when you notice that the fan is blowing warm air.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment