Why is my cruise control not working on my Subaru Outback?

Possible Reasons for Cruise Control Not Working on Subaru Outback
There are several potential reasons why the cruise control on your Subaru Outback may not be working. Here are some common causes based on the search results:
1. Electronic System Issues: Modern cruise control systems use an electronic system to operate the throttle directly. Any wiring or electrical problems outside the fuse box can cause the cruise control to stop working.
2. Adaptive Cruise Control Camera: If your Subaru Outback is equipped with adaptive cruise control as part of the EyeSight suite of driver assist features, issues with the cameras used by this system, such as being dirty, blocked, or not functioning properly, can cause the cruise control to malfunction.
3. Mechanical or Vacuum-Actuated Systems: Older vehicles may have purely mechanical or vacuum-actuated cruise control systems. If your Subaru Outback is an older model, it’s important to consider the type of cruise control system it is equipped with.
4. Brake Light Issues: In some cases, issues with the brake lights can affect the cruise control. For example, if the switch on the brake pedal or clutch pedal is not working or needs adjustment, it can impact the cruise control’s functionality.
5. Other Electrical or Mechanical Problems: There could be other underlying electrical or mechanical issues that need to be diagnosed by a mechanic to determine the nature of the problem.
Next Steps
Given the potential complexity of diagnosing cruise control issues, it’s advisable to visit the service center at your nearest authorized Subaru dealer for a long-term repair. A mechanic can perform a thorough inspection to identify the specific cause of the malfunction and provide the necessary repairs.
If you’re experiencing additional warning lights or indicators along with the cruise control issue, it’s important to have these addressed as well, as they may be related to the underlying problem.
Always prioritize safety and have any issues with your vehicle’s functionality addressed promptly by a qualified professional.

Why does Subaru disable cruise control?

Why does Subaru disable cruise control whenever a check engine light turns on? The cruise control software has to assume that the car is operating normally. Some faults such as a problem with fuel injectors would directly affect the throttle’s ability to control vehicle acceleration.

How do I activate cruise control on my Subaru?

Next. You’re going to hit your adaptive button and the little steering wheel on the side is going to pop. Up.

Why would my cruise control suddenly stopped working?

Since your car’s cruise control is part of an electrical system, it needs a fuse to function properly. A short circuit in this system can cause a fuse to blow, which means that the cruise control will suddenly stop working. Fortunately, replacing a blown fuse is a cheap and easy repair for any auto mechanic.

How do you diagnose cruise control problems?

A quick way to diagnose this is to try holding the brake pedal up with the top of your left foot at the same time as you are engaging the cruise control while on a test drive. If the cruise control tries to set, then the brake switch will most likely need to be adjusted. Adjustment of the brake switch is very common.

Why would adaptive cruise control stop working?

Some things that can keep your Adaptive Cruise Control from working properly: Bad weather that affects road visibility. Moisture on the inside or outside of the windshield. Blocked or dirty radar sensors or cameras.

How much does it cost to fix adaptive cruise control?

The average cost for a Cruise Control Module Replacement is between $623 and $636. Labor costs are estimated between $50 and $63 while parts are typically priced around $574. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

Can you reset your cruise control?

If you notice that your speed fluctuates after setting it, your system may be malfunctioning. To determine if you have a problem, try resetting the system. To do this, turn the cruise control off by disengaging the switch in your car. Next, turn the system on again, set a speed, and reapply cruise control.

What does it cost to fix cruise control?

The average cost for a Cruise Control Module Replacement is between $623 and $636. Labor costs are estimated between $50 and $63 while parts are typically priced around $574. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

How do I reset my adaptive cruise control?

Here are the steps to reset adaptive cruise control (ACC).

1. Step 1: Consult Your Vehicle’s Owner’s Manual.
2. Step 2: Start Your Vehicle.
3. Step 3: Access the ACC Menu.
4. Step 4: Select ‘Reset’ or ‘Default’
5. Step 5: Press and Hold the Reset Button.
6. Step 6: Confirm the Reset.
7. Step 7: Monitor System Reset.
8. Step 8: Verify ACC Reset.

What actions deactivate cruise control?

To stop cruise control briefly (such as when a car in front of you brakes), just press the brake as you normally would. If you are driving a manual, you can also disengage cruise control by pressing the clutch. If you are completely done using cruise control, you can press the “OFF” or “ON/OFF” switch.