AHG Auto Service » Make » Chevrolet » Why wont my key turn in the ignition Chevy Sonic?

Why wont my key turn in the ignition Chevy Sonic?

It sounds like you’re experiencing a frustrating issue with your Chevy Sonic’s ignition. There are a few potential reasons why your key won’t turn in the ignition, and some steps you can take to address the problem.
Possible Causes and Solutions:
1. Binding Steering Column/Lock, Ignition Switch, or Ignition Key: This issue could be related to the steering column, ignition switch, or the key itself. It’s recommended to have a professional diagnose and address this problem.
2. Misaligned Steering Wheel: A misaligned steering wheel can bind the ignition switch, causing the key to be stuck. Try gently turning the steering wheel from side to side while attempting to remove the key. This may ease the tension on the ignition cylinder and allow the key to be released.
3. Worn Ignition Barrel or Faulty Ignition Component: Over time, the components of the ignition system can become seized up or loaded with dust, preventing the key from working properly. If you feel problems inserting and turning the key before it locks completely, there may be an issue with the ignition barrel or another component. In this case, professional inspection and repair may be necessary.
Additional Insights:
It’s worth noting that this issue seems to be a common concern among Chevy Sonic owners, and it’s important to address it promptly to avoid further inconvenience. If your vehicle is still under warranty, it’s advisable to consult with the dealership service manager to investigate whether the issue may be covered under warranty.
If you’re unable to resolve the issue on your own, seeking professional assistance from a certified mechanic or dealership service center is recommended to ensure the problem is properly diagnosed and addressed.
I hope these insights help you address the issue with your Chevy Sonic’s ignition! If you have any further questions or need additional assistance, feel free to ask.

Why is my Chevy key not turning?

A key not turning could be caused by the key itself, the lock, or a variety of components in the security system. Outside of something being wrong with the key, the technician may look for issues in the ignition cylinder or in the car’s security computer, which on many models is separate from the engine’s computer.

What do I do if I can’t turn my key into ignition?

While this probably means that the steering column lock has been engaged. And you won’t get to turn the steering wheel. It’s an anti-theft device. But don’t worry it’s easy to disengage.

Why won’t my Chevy Sonic crank?

The most common reasons a Chevrolet Sonic won’t start are a dead battery, an alternator problem, or failed starter.

What’s the signs of a bad ignition switch?

Ignition switch problems can range from flickering interior lights to something more severe, such as a no-start condition from your vehicle.

  • Engine Won’t Start.
  • Vehicle Starts and Suddenly Stalls.
  • Intermittent Loss of Lighting and Other Accessories.
  • Silent Starter Motor.
  • Difficulty Turning the Key.
  • Lock/Off.
  • Accessory.
  • Run.

How do I unlock the steering wheel?

Just take the steering wheel. Move it gently. And turn the key gently wiggle it and turn the steering wheel gently.

Why is the ignition locked up?

A simple solution to getting the ignition key to turn may be as easy as checking the gear shift. In automatic cars, the ignition key won’t turn in the lock if it’s not parked or in neutral. Gently move the gear shift from side to side to check its fully in position, before trying to turn the key.

What sensors can cause crank no start?

The Crankshaft Position Sensor (or CPS) is the most important sensor on the engine . It can cause anything from a no start condition to a simple check engine light/service engine soon .

What fuse causes car not to crank?

In short, a fuel pump fuse is the quickest way to disable the vehicle from starting. Other vital fuses are coil packs and electrical control units. These fuses prevent the car from starting until they are back to their respective places.

How do I know if my ignition lock cylinder is bad?

If it does, you’ll encounter symptoms such as these: Key is hard or impossible to turn in the ignition. If you’re unable to turn the key in the cylinder smoothly, it might be either the cylinder itself or the switch behind it that’s jammed or binding. Engine won’t crank.

How do you unlock a steering wheel?

Just take the steering wheel. Move it gently. And turn the key gently wiggle it and turn the steering wheel gently.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment